Removing The Odd Filler Cover - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

7.19.3 Removing the ODD filler cover

Figure 73: Removing the ODD filler cover
Ê Using a slotted screw driver, pry the ODD filler cover out of its bay and
remove it from its installation bay.
V
CAUTION!
The ODD filler cover is not for future use. You cannot install the ODD filler
cover again.
Do not pry out the ODD filler cover, if you do not install a slimline ODD.
MX130 S2
Upgrade and Maintenance Manual
HDDs and accessible drives
137