Removing An Esata Cable; Concluding Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

Expansion cards
9.2.4.4

Removing an eSATA cable

Figure 106: Removing an eSATA cable
Ê Fold up the locking handle on the slot bracket clamp.
Ê Carefully remove the eSATA cable from its slot.
9.2.4.5

Concluding steps

Perform the following procedures to complete the task:
Ê Install a PCI slot bracket as described in section
bracket" on page
Ê Follow all procedures described in section
172
167.
Upgrade and Maintenance Manual
"Installing a PCI slot
"Closing the server" on page 54.
MX130 S2