Accessing The Station Alarm Limits Window From The Station List; Accessing The Station Alarm Limits Window From The Station Map - Enterasys MicroMMAC-T User Manual

Token Ring Alarms

Accessing the Station Alarm Limits Window from the Station List

To access the Station Alarm Limits window via the Station List window:
1. Click to display the Network pull-down menu.
2. In the Network pull-down menu, click on the Network 1 entry, then drag right
3. Click on the Alarm Limits radio button in the lower left of the window.
4. Double-click on the station for which you want to set alarms. The station will
5. Set the station alarm limits as instructed in the

Accessing the Station Alarm Limits Window from the Station Map

To access the Station Alarm Limits window via the Station Map:
1. Click to display the Network pull-down menu.
2. In the Network pull-down menu, click on the Network 1 entry, then drag right
3. Click on the station icon in the map representing the station for which you
4. In the Station Command menu, click on Alarm Limits.... The Station Alarm
5. Set the station alarm limits as instructed in the
4-6
and down to select Station List. The Station List window will appear.
be highlighted to show it is selected. The Station Alarm Limits window
(Figure 4-2) will appear.
Limits section, below.
and down to select Station Map. The Station Map will appear.
wish to set station alarm limits. The Station Command menu will appear.
Limits window (Figure
Limits section, below.
4-2) will appear.
Setting Station-Level Alarm
Setting Station-Level Alarm
Station-Level Alarm Limits