Show Maclock; Show Maclock Output Details - Enterasys D-Series Cli Reference Manual

show maclock

For information about...
set maclock move
set maclock trap
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC locking information for
D2(su)->show maclock ge.1.1
MAC locking is globally enabled
Port
Number
-------
ge.1.1
Table 17‐47 provides an explanation of the command output.
Table 17-47 show maclock Output Details
Output Field
Port Number
Port Status
Trap Status
Aging Status
17-52 Security Configuration
(Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 6‐1.
Port Trap Aging
Status Status Status
------- -------- -------
enabled disabled enabled
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
Whether MAC locking is enabled or disabled on the port. MAC locking is globally
disabled by default. For details on enabling MAC locking on the switch and on one or
more ports, refer to
page 17-55.
Whether MAC lock trap messaging is enabled or disabled on the port. For details
on setting this status, refer to
Whether aging of FirstArrival MAC addresses is enabled or disabled on the port.
Refer to "set maclock
Max Static Max FirstArrival
Allocated Allocated
---------- ---------------
20 1
CLI" on page 6-1.
"set maclock enable" on page 17-54 and
"set maclock trap" on page 17-61.
agefirstarrival" on page 17-59.
Refer to page...
17-60
17-61
.1.1.
ge
Last Violating
MAC Address
---------------
00:a0:c9:39:5c:b4
"set maclock" on