Resolution T Ransmission - Brother IntelliFAX 1350M Owner's Manual

SENDING FAXES
FAXTRANSMISSION O PTIONS
Setting Your Fax Machine for Multiple Resolution Transmission
This is a temporary setting for the current transmission,job only.
You can set the resolution of the documents you send by pressing RESOLUTION. Once you set
the resolution, all the pages will be sent at the same resolution. However, there may be times
when you want to send some pages at one resolution, such as "standard", and ether pages in
another resolution, such as"photo." If you send all pages in photo resolution, for instance, it would
take a great deal of time. It is better to specify the resolution for each page to minimize
transmission time. This is made possible by using the 1.TEMP. SETTINGS function.
1. Insert the documents into the
feeder.
m
m |" 1:11 _][,"] ; ,llr.'YAv, vji III_]: [e_',v . ._U_
( 09/12/1996 15:25
((
FAX: NO. & START
))
( COPY: PRESS COPY ]
2. Press
FUNCTION.
3. Press
1.
4. Press 5.
.
.
.
.
9.
Press -.9 (left arrow) or _ (right
arrow) to find the resolution you
want for the first page of your
documents.
Example: FINE.
Press SET.
Return to step 5 for setting the resolution
for page 2 and the following pages.
When you finish setting the resolu-
tion for all your pages, press STOP.
Enter the fax number.
Press START.
The resolution will revert to STAND-
ARD after the documents have been sent.
(
( 1.TEMP.SETTINGS )
( 1.TEMP.SETTINGS
( 5. RESOLUTION
(
PAGE 01:STANDARD
)'%
( SELECT <- -> & SET )
.J
( PAGE 01:FINE )
PAGE 02:FINE
FAX: NO. & START-]
((
COPY: PRESS COPY )
___
:i'" "_-12 .......
I1"117
6-13