Brother IntelliFAX 1350M Owner's Manual page 54

SENDING FAXES
ADVANCED FAX TRANSMISSIONS
Delayed Transmission
You can set the timer to send documents at a later time (up to 24 hours later). Your fax machine
will also produce a report, the "Delayed Sending Report", after the fax is sent. You can set up to
three different documents for delayed transmission.
.
Insert the documents into the
feeder.
2. Press SUPER Q.SCAN if you use
memory transmission; if not you
can send your fax normally.
3. Press FUNCTION.
4. Press 1.
5. Press 1.
6. Enter the time in 24-hour format
using the number keys.
Example: 19:45 (7:45 P.M.).
7. Wait for two seconds.
8. Press
STOP.
9. Enter the fax number.
10.Press START.
The fax machine will wait until the
specified time to call.
m i: 14 .] 1,'] " J r .'VAVi II_ I_!: [e]L',vh=_
(_09/12/1996 15:25
((
FAX: NO. & START _
( COPY: PRESS COPY
MEMORY 1_ 00% _
_(
ENTER FAX NO )
( I.TEMP.SETTINGS ]
( I.TEMP.SETTINGS )
( 1. TIMER
( SET TIME=O0:O0 )
( SET TIME--19:45 )
(
( 1. TIMER
( ENTER FAX NO. )-%
( MEMORY 100% )
J
[ NJ O FICE )
( 09/12/1996 15:25 )
Setting the Daily Timer (for Delayed Transmissions)
The Daily Timer function lets you send a fax at a set time every day. This is handy for sending
delayed jobs that must go out at the same time daily. Once you enter the time, you don't have to
enter it again. The setting will stay the same until you change it. So you can use it everyday, or
only on days when you need it.
i. Press
FUNCTION.
2. Press
7.
3. Press 2.
n iI:14 D]_:,] ;jwr-'¥&VJ I! I_1: [o_
(__09/12/1996 15:25
1.TEMP.SETTINGS
( 7.SETUP
SYSTEM
]
( 2.DAILY TIMER
]
6-7