Brother IntelliFAX 1350M Owner's Manual page 99

REMOTE FAX OPTIONS
I0. REMOTE FAX OPTIONS
(ONLY
FOR FAX
1350M)
Since the machine can store incoming data as well as record it, you can use the conx cment
FAX
Forwarding, Paging and Remote Retrieval functions.
Setting the Fax Storage
Set this function to "ON" if you want the incoming data to be stored in the memory as well as
recorded. Since the data can be stored in the memory, you can use the Fax Forwarding, Paging,
and Remote Retrieval functions. It is a good idea to set the Fax Storage function to "ON" when
you go out. The initial setting is OFF.
1. Press FUNCTION.
2. Press 8.
3. Press 1.
4. Press --9 (left arrow) or _.- (right
arrow) to select ON or OFF.
Example: ON
5. Press SET.
6. Press STOP to exit.
_ i :]'4 D] [ .1r,] I E¥'&VII III_! -"[e_,,,,_
( 09/12/1996 15:25 )
( 1.TEMP.SETTINGS )
( 8.REMOTE FAX OPT ]
( 1.FAX STORAGE
( FAX STORAGE:OFF )_
(-
"-( SE,ECT <--, SET)
(
FAX STORAGE:ON ]
( 1.FAX STORAGE
FOR YOUR INFORMATION
• When you have FAX STORAGE:ON, your incoming faxes will be stored in the
memory and the LCD will show the number of incoming calls:
( FAX
IN MEMORY:01
• When you want to change the Fax Storage setting from ON to OFF and there is
fax data still in the memory, you will get the following message after you select
OFF:
ERASE ALL FAX? I_
(( 1.CLEAR 2.EXIT
If you select 1 you will erase all the fax data in the memory and the function will be
set to OFF. If you press 2, the data will not be erased, and the setting will remain ON.
....... dJ. E [ I! .... • ........... ' I!lll .
10-1