Brother IntelliFAX 1350M Owner's Manual page 123

PAGING /FAXFORWARDING MESSAGE CENTER MODE SETTINGS
1. It}LIL_H[dLLI\d[L'tHI[> [)_tBII|_uI ldXItH _,tltiln_,t[]c_ ,tit xt t) .,_lllll[al'|Olt[ult._,tlK_
can not be used simultaneously.
2 The paging feature can be used in the lnmted modes of the Message Center, since
it will page based upon receipt of messages into the memory.
3. If paging is ON, you will be paged every time a voice or fax message is received into
memory.
Setting Up Paging (Registering Paging Number)
1. Press FUNCTION.
2. Press 8.
3. Press 3.
4. Press --_ (left arrow) and _ [right
arrow) to select PAGING.
5. Press
SET.
6. Enter a paging number up to 20
digits (this is the telephone number
of your pager), followed by two #
signs. Do not include the area code
if it is the same for your fax ma-
chine and pager.
Example: 18002844329##.
7. Press SET.
•m,_i;]'_ i] F'] ; jIrA'&YjII!_']-" [-]A'_
(
09/12/1996 15:25 ]
( 1.TEMP.SETTINGS )
(" 8.SETUP MSG CTR )
( 3.FAX '_WD/PAGING
)
CoFF
) )
[ SELECT ÷ ÷ & SET)
( PAGING )
(
[ PAG#:
]
[ ENTER
& SET
]
( #:18002844329##_ )
F-(
PIN#: )
)
x.
ENTER & SET
I1-17