Brother IntelliFAX 1350M Owner's Manual page 57

ADVANCED FAX TRANSMISSIONS
SENDING FAXES
After scanning documents, your fax machine will start sending them in scanned order.
Helpful Hints
If you press only SUPER Q.SCAN instead of SHIFT + SUPER Q.SCAN for the
last document, your fax machine will start dialing without waiting for 30
seconds.
Interrupting the Timer and Polled Job
You can send a fax without canceling the timer (see page 6-7j or polled waiting (see page 8-2) with
documents in the feeder by "interrupting" it. When you interrupt the timer to send a "new" set
of documents, the fax machine does not automatically re-dial the number if it is busy. Also, you
can not use the function mode when you are interrupting the timer or polled waiting.
Example: TIMER WAITING with a document in the feeder.
m mHHm,
1. Press FUNCTION.
2. Press 0.
3. Wait for two seconds.
4. Remove documents from the fax
machine.
5. Place the "new" documents into the
feeder.
6. Enter the new fax number for the
documents you are sending now,
then press
START.
7. After the transmission is finished,
place the "old" documents back into
the feeder.
8. Press FUNCTION and 0 to restore
the timer.
( TIMER WAITING
)
( 1.TEMP.SETTINGS
]
( 0.INTERRUPT )
( REMOVE DOCUMENT )
( INSERT DOCUMENT )
(" FAX OR COPY
)'-_
(FUNC 0 TO RESET )
J
( DIALING )
(" SENDING
P.01 )
( INSERT DOCUMENT ]
(
FAX OR COPY ]]
( FUNC 0 TO RESET ]
O. INTERRUPT
)
( TIMER WAITING ]
_l] ...... _ ....... '-- ....... i_ • -- _ _,,,_ _¢',._
6-10