13. How To Use The Copy Function; Making A Single Copies - Brother IntelliFAX 1350M Owner's Manual

HOW TO USE THE COPY FUNCTION
13. HOW TO USE THE COPY FUNCTION
Making a Single Copies
Use this function to make a single copy.
1. lnsert the documents fhce down
into the feeder.
2. Press COPY.
( 09/12/1996 15:25 ,I
_(
FAX:
NO. & START
I)
( COPY: PRESS COPY 1
NO.OF COPIES:01 ]_
f
L[ ENTER & COPY KEY ]
J
3. Press
COPY
or just wait for 5 sec-
onds.
COPYING
Helpful Hints
NOTE:
1. Set the resolution to e_ther PHOTO or S.FINE. If you select STANDARD or
FINE, the resolution will automatically change to S.FINE.
2. When you want to change the resolution for each page, use Function menu
1-5 (see page 6-13) to set the resolution for each page.
3. When you want to make a copy, make sure the text or image on the original
document is not too close to the edge. Your fax machine cannot read anything
closer than 4 mm (1/8 inch) from the edge.
4. Do not pull on the paper while copying is in progress. This may distort the
copied image and damage your machine.
Original documents should be straight, non wrinkled, to be fed correctly. Otherwise
the documents may jam occasionally.
13-1