Brother IntelliFAX 1350M Owner's Manual page 124

MESSAGE CENTER MODE SETTINGS
PAGING/FAXFORWARDING
8. Enter a PIN (Personal Identifica-
tion Number), #, press REDIAL/
PAUSE key your fax telephone
number, and ##.
Example: 12345#-19085551234##.
- If you do not use a PIN, you must enter
the telephone number of your fax ma-
chine. Press REDIAL/PAUSE key before
entering your fax number and add ## at
the end.
Example: -19085551234##
9. Press
SET.
10. Press
STOP to exit.
[ 5#L19085551234## )
( 3.FAX FWD/PAGING )
- Paging number and PIN cannot be changed remotely.
- REDIAI]PAUSE appears as a hyphen on the display.
FOR YOUR INFORMATION
The PIN (Personal Identification Number) you enter depends upon the type of paging
company you use. There are generally two types of paging companies...
1) Satellite Pagers: In this case we recommend you enter your actual satellite PIN#
plus your return your fax telephone/fax number (or special alpha message).
PIN# Return# PIN# Alpha Message
For Example: 12345#i9085551234"## or 12345#329329329##
T
FAXFAXFAX
2) Radio Pagers: Most* radio pagers do not require a PIN #, and in this case you
should use the PIN # in your fax only for the return number or special alpha
message.
Return# Alph Message
For Example: 19085551234## or 329329329##
• ,,o
T
FAXFAXFAX
* If your radm pager utilizes a PIN # then use satellite sequence above.
The "##" symbols at the end of the return # are used to signify the end the PIN #/
Message.
11-18