Brother IntelliFAX 1350M Owner's Manual page 103

REMOTE FAX OPTIONS
6. Enter a fax forwarding number up
to 20 digits.
Example: 18005551234.
( WD#:18005551234_ )
7. PressSET. ( 2. FAX FWD/PAGING ]
8. Press
STOP to exit.
What Is Remote Control Access?
When you leave your home or office, you will turn on your FAX STORAGE to receive fax messages.
(See page 10-1.) But if you would like to activate or deactivate this FAX STORAGE feature, you
can control and program your fax by remote control. You can call your fax from any touch tone
phone, enter your remote access code, followed by programming commands.
Setting the Remote Access Code
The initial setting for the remote access code on your new fax is "159.".
1. Press FUNCTION.
2. Press 8.
3. Press 3.
4. Enter a three digit number 000 to
999. The last digit, an asterisk, can
not be changed.
Example: 160..
Enter a three digit number 000 to 999.
5. Wait for two seconds.
6. Press STOP to exit.
( 09/12/1996 15:25
( I.TEMP.SETTINGS )
( S.REMOTE F AXOPT)
( 3.REMOTE
ACCESS
)
( ACCESS
CODE:j59* ]
( ACCESS CODE:160,
3.REMOTE ACCESS ]
Helpful Hints
Change the remote control code and use it as a "secret password" to limit access
to your REMOTE FAX OPTIONS.
When you use the Remote Access Code, you must press all four keys (three-d_g_t
number plus *).
H!! !!!1 ........ I Ifllll mill
_. L : "11:1"1::" ":::L::." .....
10-5