Activity Report Interval - Brother IntelliFAX 1350M Owner's Manual

HI_'II_I INq7 I_EP'UI_ Ib AND Llblb
All the reports and lists may be printed as follows:
• D • ._ , "]'[olVIm.._
1. Press FUNCTION.
2. Press 3.
3. Press the number of the level two
function you wish to print.
Example: 1.ACT.REPORT.
4. Press START.
Activity Report Interval
( 09/12/1996 15:25 )
( I.TEMP.SETTINGS ]
( 3.PRINT REPORTS )
( 1.ACT.REPORT ]
( PRESS START KEY ]
(
PRINTING
An Activity Report can be printed at certain intervals that you specify. You can set the journal
period to "OFF", "6 hours", "12 hours", "24 hours", "2 days". "4 days" or "7 days". The Activity
Report will list all outgoing and incoming faxes (only the last 30) during that period. The factory
default setting is OFF.
After the Activity Report has printed at the preset interval, the information will be deleted and
can not be recovered. However, at any time between these scheduled reports, you can manually
print the Activity Report and the information will remain.
NOTE: Ifyour Activity Report is not listing all your transactions, select a shorter interval period.
1. Press FUNCTION.
2. Press 7.
3. Press 3.
4. Press -9 (left arrowl or m,- [right
arrow) to choose the setting.
Example: 12 HOURS.
If you select seven days, you should choose
the base day of the week.
5. Press
SET.
6. Enter the time to print in 24-hour
format using the number keys.
Example: 19:45 _7:45P._.t.
7. Wait for two seconds.
8. Press
STOP to exit.
I I
B j: 14 J,] [ .']_ Ir:V&vivj I III_']: [el';_,,_
( 09/12/1996 15:25 ]
( I.TEMP.SETTINGS ,)
( 7.SETUP SYSTEM
)
( 3.INTERVAL
)
( ACT.RPT.:OFF
)}
( SELECT ÷ ÷ & SET )
( EVERY 12 HOURS )
(
START AT:_O:O0
)
( START AT:19:45 ,]
( 3.1NTERVAL ]
l I!l l I III lll_lll B
14-9