Erasing All At Once; Remote Control Of The Voice Alarm - Brother IntelliFAX 1350M Owner's Manual

VOICE A LARM MESSAGE CENTER MODE SETTINGS
Using the Voice Alarm: Playing Entries, Erasing Entries One by
One, Erasing All at Once
Once you press FUNCTION, be ready to press PLAY, or ERASE imme&ately, depending upon
whether you want to play an entry or erase everything. For instructions on how to play and how
to erase, refer to the instructions in the ICM, Memo section. (See page 11-10, 11-12.) When you
play an entry, the display will show you the date and time of your scheduled entries. You can
delete entries one by one, the same way you would do so for incoming messages or memos: press
ERASE while playing an entry.
11you don t pl (..,> I*LA_ or ]:,RASE wltlun 2 >ccund._ tl.c. _ lille the Lt_ D dl_pl,_ 3 >
"ENTER NO. & SET") after you press FUNCTION, you will not be able to play
back or delete entries.
If you don't press FUNCTION, and just press PLAY, you will only be able to hear
incoming messages and memos. You won't be able to hear the Voice Alarm
messages.
If you don't press FUNCTION, and just press ERASE, you will only be able to
delete incoming messages and memos. Voice Alarm messages will not be deleted.
Remote Control of the Voice Alarm
When you are o11 the road, you can call your fax machine and play back your Voice Alarm
messages. (See Page 11-22.)
m
• _oU c_tn[tot >eL the Voice Ald_m b 3 tt,ntott, cuiitl'ol.
• Also, note that you will only be able to hear the recorded Vmce Alal., J,_('._.tb;l 'l o u
will not be able to see the dates and times of the schedule on the display, so it's a
good idea to record important dates and times as part of your Voice Alarm
messages when you first record them.
11-27