Memory - Brother IntelliFAX 1350M Owner's Manual

CALLERID RECEIVING FAXESAND OTHERCALLS
The Caller ID is Stored in Your Machine's Memory
The machine can store a nmximum of the last 30 incoming caller IDs in the memory, along with
the time and date of reception. The 31st call will cause the oldest ID to be erased.
The Caller ID information stored in the memory can be scrolled through on the display.
And you can also print the Caller ID list and review calls you received by checking the Caller
IDs in memory. This report will list the Date, Time, Phone Number (Caller ID), Name (in
certain states), and type of call (Comment).
Scanning through a Caller ID from the Memory
You can display the caller IDs that are stored in the memory as follows. (You can skip to Step 4
below by pressing the SHIFT and TEL INDEX keys simultaneously.)
1. Press FUNCTION.
2. Press 6.
3. Press 7.
4. Press SET.
The Caller ID of the last call wiLl appear
on the display.
If no ID is stored, the beeper will
sound and "NO CALLER ID" will
appear on the diaplay.
5. Press -91 (left arrow) or _ (right
arrow) key to scroll through the
Caller IDs in the memory.
In this example, press the b.- key 5
times.
l:t:::tt ,] ;,1
I,
( 09/12/1996 15:25
( 1.TEMP.SETTINGS
( 6.TEL OPTIONS
7. CALLER
ID
)
( 30. )1455551212 ")
(25.)5555151
Pressing the P-- key will cycle back-
ward through the stored caller IDs
fl'om the latest to the oldest. If you
press the _ key when the oldest ID
appears, the latest one will appear.
The -_, key cycles forward.
After 2 seconds, the date and time the
caller ID was received will appear.
6. Press STOP to exit.
FOR YOUR INFORMATION
Clearing the Caller ID Stored into Memory
It is recommended that you should clear the Caller ID stored into memory by
pressing CLEAR when the display shows the number or name, because of the
effective use of the memory.
IlflI!IHIPHPHI[ r! I ........... IF !r rlr
=
7.21