Table of Contents
Advertisement
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the
fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone—OR—press Speaker Phone.
3
Enter the fax number you want to call.
4
When you hear the fax tone, press Start. If you're using the handset, hang up.
Resolution
When you have a document in the feeder, you can use the Resolution key. Press Resolution
continuously until you see your selection on the screen.
see "Multiple Resolution Transmission" on page 17.
page,
Standard:
suitable for most typed documents.
Fine:
good for small print; transmits a little slower than standard resolution.
Super Fine: good for small print or artwork; transmits slower than fine resolution.
Photo:
use when document has varying shades of grey; slow transmission time.
Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page of the fax you're sending. This
could be useful if you're sending a fax with photos and letters, or some pages with small print and
others with normal print. Resolution settings return to STANDARD after the fax is sent.
1
Insert the documents face down in the feeder, then press Menu/Set, 3, 2.
2
to select resolution for page 1, and press Menu/Set.
Rotate
3
Repeat Step 2 for subsequent pages. Press Stop when
you're finished. The screen displays:
4
Press 1 if you want to select additional settings. The
display returns to the Setup Send menu—OR—Press 2
if you are finished choosing settings, and go to Step 5.
The screen prompts you to enter the fax number you want to call.
5
Enter the fax number you're calling, and press Start.
If you want to copy a document using multiple resolutions, press Copy/Help
instead of Start in Step 5.
17
Chapter 3
If you want to set a different resolution for each
ACCEPTED
NEXT
1.YES 2.NO
Advertisement
Table of Contents
