Brother IntelliFAX 1350M Owner's Manual page 40

TELEPHONE FUNCTION SETTINGS
Helpful Hints
1. The telephone number that you stored above is only used for the Call Back
Message and the Cover Page features.
2. If you do not enter a fax number, no additional information can be entered.
3. When you enter a space, use P.- (right arrow). Then it will be registered as a
blank space.
4. If Station ID has already been programmed, then after Step 3 the name will be
displayed with the prompt "1" to change "2" to exit. Press "1" if you need to
change any information. Pressing "2" to exit will take you out of the function.
The Telol)bom' Consumer
ProtouLion Act t)l _UUL ll,,_kc'> 11_ul]l_l_ lul loi _tl_> l_t l ._on
to use a computer or electronic device to send any message via a telephone fax
machine unless such messages clearly contain in a margin at the top or bottom of
each transmitted page or on the first page of the transmission, the date and time it
is sent and an identification of the business or other entity, or other individual
sending the message and the telephone number of the sending machines or such
business, other entity, or individual.
In order to program this information into your fax machine, you should complete the
steps on the previous page.
Storing One-Touch Dial Numbers
You can dial numbers autonmtically by storing telephone or fax numbers as One-Touch dial
numbers. You can also store names with the numbers so that when you call, you can verify the
destination on the display. You can store a maximum of 30 phone numbers. To use 16 to 30 One-
Touch number locations, you need to press SHIFT. For example, One-Touch location "16" is
accessed by pressing SHIFT+One-Touch "01" simultaneously. Here is how to store a telephone
number as a One-Touch dial number (See page 2-3) :
1. Press FUNCTION.
2. Press 4.
3. Press 1.
4. Press the One-Touch key you want
to use to store a number.
Example: One - Touch 05.
The One-Touch keys are not the number
keys.
_ i: 14 D]b't;,llr._VAv,,j IIII_]: [e).t,v_
( 09/12/1996 15:25 ]
( I.TEMP.SETTINGS
( 4.SETAUTO DIAL )
( 1.ONE-TOUCH DIAL)
[seLect OnE-TOucH)
( ,os:
-C ENTer & sET )
! I