Brother IntelliFAX 1350M Owner's Manual page 67

FAX TRANSMISSION
OPTIONS
SENDING FAXES
ECM (Error Correction Mode)
The Error Correction Mode tECM) is a way for the machine to check the integrity of a fax
transmission while it is in progress. ECM transmissions are possible only between machines that
both have the ECM feature. If they do, you may send and receive fax messages that are continually
checked for their integrity.
Sufficient memory nmst be available in your machine for this feature to work.
Error Re.Transmission
Error Re-Transmission is helpful when the receiving machine does not have ECM. Even though
your machine cannot check the integrity of the message, it will resend the page(s) affected after
occurrences of accidental noise have caused an error.
,_€ : k'_-'ll[all "J:1:[,'!-_
1. Press FUNCTION.
2. Press 5.
3. Press 4.
4. Press -,-I (left arrow) or _-- (right
arrow) to choose either ON or OFF.
Example: ON.
5. Press SET.
6. Press STOP to exit.
i
m i:i :i,] m I.vA,,,JtI
( 09/12/1996 15:25 ]
I.TEMP.SETTINGS
( 5.USER OPTIONS )
( 4.ERROR
RE-TX )
ERROR RE-TX:OFF I_
C
"'( SELECT <'- -)' & SET )
( ERROR RE-TX:ON )
4.ERROR RE-TX )
- This feature is available only for memory transmission using Super Quick-Scan (see
page 6-6-10).
6-20