Brother IntelliFAX 1350M Owner's Manual page 111

O rrmGSTARTED
MESSAGE CENTER MODE SEI-flNGS
• Message Center Pro Mode is ON, but No Access Command was Entered by the Caller:
1) FAX: ON
TAD: ON
MEMORY
Fax reception Is
activated by the
CNG Fax Tones
automatically.
The fax message
Is received into
memory.
1 Incoming Call I
[MSG CTR PRO OGM % The caller must press
Auto dial/is activated, but no Manual your remote code to REMOTE
faxcal_-l:°tmrmdddur_ag the _ activate the fax CODE
I _
[OGM _____ machne. _<51
%1 VOice call ' 1
'_,
The caller leaves a _EMORY I
voice message in The fax message
digital memory or :l'llecaller is received into
hangs up. can also memory. MEMORY
send a fax
If the caller stops speaking for 5 seconds while leaving a message, the machine will go to fax
receiving mode automatically.
2) FAX: ON
TAD: EXT.
(External Answering Machine is ON.)
Incoming Call
Fax reception is I Auto dial I
activated by the The external TAD is
CNG Fax Tones fax call activated.
automatically. } _ I
l I v°ice call
The fax message
is received into
MEMORY memory.
The caller leaves a
voice message on
the external TAD.
]%
%
%
EXT.
TAD
MEMORY
1
The caller must pressl
your remote code to IREMOTE
i
activate the fax I CODE
machine. ],51
1
The fax message
is received into
memory. MEMORY
3)
FAX: ON
TAD: OFF
(Also, External Answering Machine is OFF.)
I
MEMORY I
_1 Incoming Call ]
MSG CTR PRO OGM ]
is activated, but no
command was I
entered during the
OGM
Fax reception is activated automatically. I
m
The fax message is received on paper. ]
I
11-5