Telephone - Brother IntelliFAX 1350M Owner's Manual

REMOTE A CTIVATIONRECEIVING FAXESAND OTHERCALLS
B) REMOTE ACTIVATION
What is Remote Activation?
If you answer a call that is a fax message, you can use the Remote Activation Code to make your
fax machine take over the call. If your fax machine answers a telephone call that is for you, you
can use the Remote Deactivation Code to pick up the call at an extension phone. (You do not need
a code to take over a call at the fax machine.) You must use a touch tone phone.
FOR YOUR INFORMATION
Connecting an External or Extension Telephone
You may connect an external telephone to your fax machine, as shown below. Use the
"EXT." jack on your fax machine. Alternately, you may wish to use this "EXT." jack
to connect a telephone answering device (TAD). An extension phone is a telephone
that is plugged into a separate wall jack on the same line.
External
Telephone
Extension
Telephone
If the external telephone is in use, the warning message "EXT. TEL IN USE" will be
displayed on the fax LCD. When the handset on the fax machine is picked up, an
alarm will sound. You can disconnect the external phone and switch to the fax
machine's handset by pressing HOOK.
Using Remote Codes
The Remote Activation Code (.51) is used in F/T mode, TAD mode and MSG CTR mode. The
Deactivation Code (#51) is used only in Ffr mode and MSG CTR mode.
7-11