Brother IntelliFAX 1350M Owner's Manual page 117

GETTING STARTED MESSAGE CENTER MODE SETTINGS
Printing a Fax Message
You can print a fax message that is stored in the memory.
Once you print a fax message, the FAX indicator light turns to be off.
_ :_ __ col'_' • •,._' _-__"
1. Press FUNCTION.
2. Press 8.
3. Press 7.
4. Press START.
5. Press STOP to exit.
TAD:03 FAX:02 )
(, 1.TEMP.SETTINGS )
( 8.SETUP MSG CTR ]
( 7. PRINT* FAX )
( PRESS START KEY )
[PRINTING )
( 7.PRINT FAX )
FOR YOUR INFORMATION
Erasing and Printing FAX Messages
1. It is not possible to erase a single fax message, you can erase only all or none of
them. (See page 11-12, "All in One Erasing".)
2. If you choose to erase all the fax messages, your fax machine will print
automatically any fax messages that have not been printed, before it erases them
from the memory.
Calling Your Message Center for Messages (See Remote Re-
trieval)
If you have set your Message Center to store incoinlng fax messages (via FAX: ON, TAD: OFF/
EXT. or FAX: ON, TAD: ON modes), you have the ability to retrieve these fax messages from any
remote group 3 facsimile machine.
Of course you can also remotely retrieve your voice messages as well from any touch tone phone.
(See page 11-22 for more information.)
11-11