Brother IntelliFAX 1350M Owner's Manual page 30

HOW TO USE ON-SCREEN PROGRAMMING AND HELP KEY
Level one Level two Explanation of Options Factory
function function setting
4. SETAUTO
DIAL
5. USER
OPTIONS
6. TEL
OPTIONS
3. SETUP
GROUPS
1. SMOOTHING
2. BEEPER
3. COVERPG
ON/OFF
4. ERRORRE-TX
5. REDUCTION
6. RCDPAPER
1. TONE/PULSE
2. RINGDELAY
3. SPEAKER
VOLUME
This is used for setting up a group number
used for broadcasting.
Smoothing enhances the appearance of in-
coming faxes.
If you set SMOOTHING to ON, you will
receive messages with the smoothing
enhancement.
ON/OFF
You can adjust the volume of the beeper with
this function.
OFF/LOW/HIGH
If you set COVERPAGE to ON, you can send
your documents with a Cover Page generated
by your machine. When the COVERPAGE
setting is ON, you can select a Cover Page
comment.
ON/OFF
If you set ERROR RE-TRANSMISSION to
ON, the machine automatically resends the
page once an error occurs.
ON/OFF
You can avoid having an incoming fax on
separate pages by printing a reduced copy of
the incoming document. The reduction
methods are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
You can select one of 3 sizes of recording
paper. The machine automatically will adjust
the size of the incoming document or original
document so that it fits the paper size you
have selected.
LETTER_EGAL/A4
There are two different dial types and you
must select the type of signal suitable for
your telephone line.
TONE/PULSE
This is the number of rings before the fax
machine answers the call when in F/T or
AUTO Answer Mode.
0/1/2/3/4 rings
You can adjust the speaker volume with this
function.
OFF/LOW/HIGH
ON
LOW
OFF
OFF
AUTO
LETTER
TONE
LOW
Page
4-8~9
7-5
4-1-2
6-16
6-20
7-7-8
7-6
4-1
7-2
7-9
3-4