Function - Brother IntelliFAX 1350M Owner's Manual

HOW TO USE ON-SCREEN PROGRAMMING AND HELl-' KI::Y
Level one
function
7. SETUP
SYSTEM
8. REMOTE
FAXOPT
(Only f orFAX
1350M)
8. SETUP
MSGCTR
(Onlyfor
FAX
1450MC/
1550MC/
MFC
1850MC/
1950MC)
Level two
function
8. MISSINGLINK
(ONLY forMFC
1850MC!1950MC)
1. FAXSTORAGE
2. FAXFWD/
PAGING
3. REMOTE
ACCESS
4, PRINTFAX
1. MESSAGE
STORAGE
2. BACKUPPRINT
3. FAX FWD/
PAGING
4. REMOTE
ACCESS
Explanation of Options
You can select the output device that will
receive fax message. (MFC 1850MC/
1950MC). (FAX 1350M/1450MC/1550MC are
available when The optional Missing Link is
connected.)
You can store the incoming fax messages in
the memory. Then you can use the convenient
remote control functions.
ON/OFF
You can choose among PAGING, FAX
FORWARDING or OFF. PAGING ON will
cause the fax machine to page you when it
receives a fax message. FAX FORWARDING
ON will cause the machine to send any
stored faxes that are received to another
predetermined fax number.
OFF/FAX FORWARD/PAGING
You can register a REMOTE ACCESS ID (3
digits) allowing you to remotely operate the
machine. (Example :Retrieving an incoming
fax message)
You can print incoming faxes that were
stored in the memory.
You can select memory usage of the machine
in MESSAGE CENTER mode.
FAX:ON/OFF, TAD:ON/EXT/OFF
You can set the machine to print a back-up
copy of faxes that are received into the
Message Center memory.
ON/OFF
You can choose among PAGING, FAX
FORWARDING or OFF. PAGING ON will
cause the fax machine to page you when it
receives a fax message. FAX FORWARDING
ON will cause the fax machine to send any
stored faxes that are received to another
predetermined fax number.
OFF/FAX FORWARD/PAGING
You can register a REMOTE ACCESS ID (3
digits) allowing you to remotely operate the
machine. (Example :Retrieving an incoming
fax message.)
Factory
setting Page
See the
PC Missing
PRIMARY Link
Manual
OFF 10-1
OFF 10-2~5
159_< 10-5-8
10-7
FAX:OFF
11-7
TAD: ON
ON 11-10
OFF 11-16~19
159_< 11-20
i
............. I riTi i _ r
,:7-6