Brother IntelliFAX 1350M Owner's Manual page 115

GETTING STARTED MESSAGE CENTER MODE SETTINGS
Activating the Message Center Mode
Now that you have selected the type of message storage you need (see page 11-7) and recorded
your outgoing message (see page 11-8), you are ready to turn your Message Center Mode on, when
you leave your home or office.
To activate Message Center .....
\\//
S AUTO Press MODE on the control panel until both the"AUTO" and "F/T" lights are
/Q...FfI" on.
...Then you can easily identify the Message Center mode that is on by viewing the Message Center
indicator lights.
B) GETTING YOUR MESSAGES
How Will I Know Messages Have Been Received?
Once you return home or to the office you can easily and quickly see if any voice or fax messages
have been stored in the Message Center. There are two ways to determine if messages are stored.
(1)
(2)
If the TAD and/or FAX indicator lights are flashing, there is a new message stored.
( O_- means flashing.) Once a new voice message is played, the TAD indicator light stops flashing and
stays on. And once a new fax message is printed, the FAX indicator light turns to be off.
TAD FAX ]
RECORD ERASE PLAY
The LCD display will indicate the total number of incoming TAD and/or FAX messages stored
in Message Center memory. The number of TAD includes the Memo messages.
((
[
f
TAD:03 FAX:02
MAIL BOX:I 345
_ See page 11-10 for playing ICM.)
(See page 11-11 for printing faxes.)
(See page 12-18 for playing Personal Mailbox ICM.)
FOR YOUR INFORMATION
What Happens When the Memory Is Full...
If the memory becomes full when you have set your fax machine to Message Center
mode or Message Center Pro mode, the machine will change to Ffr mode automatically.
(LED lights do not change.) In this mode, the fax machine can accept incoming faxes
automatically. Fax-on- demand and Voice-on-demand are still available for callers,
but they cannot gain access to Personal Mailbox. Then, if your fax machine should
run out of paper, the answer mode will shift automatically to manual mode. In
manual mode the call is not answered, so your caller will know to try again later.
I Out of RecordingPaper andMemory Full
[AnswerMode] [MSGCTRModeJT ] F/TMode [-_]ManualMode]
MemoryFull Out of RecordingPaper
and Memory Full
Print the Memory Status List (see page 14-5) and select the item to be cleared and
gain the memory for the effective use of it.
,mIH|HIlmlmr
11-9