Sending Faxes - Brother IntelliFAX 1350M Owner's Manual

SENDING FAXES
DOCUMENT BASICS
6. SENDING FAXES
A) DOCUMENT BASICS
The Size of Your Documents
216mm (8.5")
Maximum
148mm
J _ 1.0ram
Minimum I (3.9")
/
/
600mm ."
(23.6") / scanned
/
.'" (printed)
. _ - area
/
/
/
4mm
216mm (8.5")
< 208ram (8.2"_ " <4mm
€o
=
The size of the documents you want to send by fax should not be larger (or smaller) than your fax
machine can accommodate. The documents should each be between 148 and 216 mm (5.8 and 8.5
inches) wide and between 100 and 600 mm (3.9 and 23.6 inches) long.
The maximum width of the scanned area is 208 mm (8.2 inches), which can be printed on the
recording paper of the recepient's fax.
How to Insert the Document
To send a fax, first insert the document you wish to send, face down, m the
document feeder. The top edge of the document should go in first, or the fax
will be received up side-down.
To prevent the document from going crooked as it is fed, adjust the paper
guides to fit the width of the document.
+
dO.L
_o]Ko]_mmmimumim
About tit(, Do('ul.c_Is You _end...
I)o not use documcats that are curled, \x_mklcd, toldcd,
ripped, ul
that cuHtam
staples, paper clips, paste, or tape. Also, do not use cardboard, newspaper, or fabric.
curled folded staples tape
JJ
6-1
wrinkled ripped paper clip fabric /
.. _E[gkiL. ! All
J
irl]l! ] ...... JU[ ..