Step 6: Fusing - Epson AcuLaser CX-11N Repair Manual

Epson AcuLaser CX-11N/AcuLaser CX-11NF Field Repair Guide

Step 6: Fusing

Figure 7: The toner image is permanently bonded to the media by the heat roller and fuser belt.
With the toner now resting on the media, the printer moves the paper through the paper path to the Fuser where heat
heat is applied to permanently bond the toner into the media. As the media passes into the Fuser assembly, the Heat
Roller and the Fuser Belt are used to bond the toner image into the media. As the media moves out from between
the Heat Roller and Fuser Belt, a Separation Pawl ensures that the media does not stick to or cling to the Heat
Roller. The Fuser Thermistor monitors the temperature of the Fuser and turns the Heater Lamp on and off, based
on Fuser temperature.
Printer Component, Software Item,
manuals4you.com manuals4you.com
LCD Display, Printer Button
9/9/05
Page 6.