Removing The Pick-Up Roller - Canon NP6330 Service Manual

CHAPTER 8 PAPER DECK PEDESTAL
6) Remove the nine mounting screw

3. Removing the Pick-Up Roller

1) Remove the pick-up assembly.
2) Remove the stop ring
collar.
Points to Note
When attaching the pick-up roller
round mark on its rubber portion is toward the front of the pedestal.
a. The collars for the pick-up roller are identified by the color: use the gold collar for the
front, and the silver color for the rear.
b. Do not separate the rubber portion of the pick-up roller from the collar.
8-30
Figure 8-628
, and remove the pick-up roller
Figure 8-629
Figure 8-630
COPYRIGHT © 1997 CANON INC.
, and remove the pick-up assembly
to the pick-up assembly, make sure that the
(front of pedestal)
Collar
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
together with the roller