Canon NP6330 Service Manual page 515

CHAPTER 11 TROUBLESHOOTING
No.
410 Use it to check the operation of the blank
shutter motor.
411 Use it to initialize the data of the RAM on
the DC controller PCB.
412 Use it to automatically adjust the
multifeeder paper width detection reference
point 1, 2, or 3.
413 Use it to automatically adjust the cassette 1
paper width detection reference point 1 or 2.
414 Use it to automatically adjust the cassette 2
paper width detection reference point 1 or 2.
415 Not used
416 Not used
11-174
Description
COPYRIGHT © 1997 CANON INC.
Place two sheets of A4 copy paper
on the multifeeder tray, and open
the copyboard cover. Press the OK
key so that the blank shutter will
shift and two copies will be made.
(The margin changes from A6R to
A4R.)
Press the OK key and then the
user mode key to initialize the
RAM.
See p. 11-44.
See p. 11-43.
See p. 11-43.
-
-
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks