Removing The Fixing Cleaning Belt - Canon NP6330 Service Manual

3. Removing the Fixing Cleaning Belt

1) Remove the fixing assembly from the copier.
2) Remove the two screws
3) Insert a flat-blade screwdriver
the fixing cleaning belt.
4) Turn the cleaning belt setting shaft
remove the fixing cleaning belt
COPYRIGHT © 1997 CANON INC.
, and remove the fixing cleaner assembly
Figure 6-407
into the stop plate
Figure 6-408
of the fixing cleaner assembly clockwise, and
.
Figure 6-409
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
.
; then, release the pressure on
6-15