Stringing The Guide Wire; Adjusting The Height Of The Charging Wire - Canon NP6330 Service Manual

CHAPTER 11 TROUBLESHOOTING
5

Stringing the Guide Wire

The guide wire is 0.148 mm in diameter.
When stringing it, be sure to follow the order indicated in the figure.
A
6

Adjusting the Height of the Charging Wire

The height of the charging wire may be adjusted by turning the screw located behind
the charging assembly. A full single turn of the screw raises or lowers the charging wire
by about 0.7 mm.
Corona Unit
Primary
Transter
11-32
2
1 4
Figure 11-232
Figure 11-233
COPYRIGHT © 1997 CANON INC.
3
5 6
7 8 10
Height of Standard Position
A
B
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
9 12
11 13
A=10.6 ± 0.3mm
B=9.5 ± 0.2 mm
B