Canon NP6330 Service Manual page 198

CHAPTER 5 PICK-UP/FEEDING SYSTEM
7) Remove the stop ring
8) Remove the separation roller unit
9) Pull out the separation roller shaft, and remove the separation roller.
Reference:
Whenever installing the separation roller
the D-cut will be toward the front of the copier.
5-52
and the support shaft
Figure 5-714
(rear)
Figure 5-715
COPYRIGHT © 1997 CANON INC.
.
.
to the pick-up assembly, be sure so that
(front of copier)
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)