Installing The Magnetic Seal And The Blade - Canon NP6330 Service Manual

4. Installing the Magnetic Seal and the Blade

1) Clean the contact face on the magnetic seal with alcohol.
2) Attach the magnetic seal as shown. (Pay attention; the magnetic seal is different in
shape between front and rear.)
Check to make sure that the magnetic seal and the case are in contact.
3) Install all parts except the blade and the developing assembly cover.
COPYRIGHT © 1997 CANON INC.
(rear)
Magnetic seal
Opening (butting reference)
Figure 4-347
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
(front)
4-47