Lens Drive Assembly - Canon NP6330 Service Manual

CHAPTER 3 EXPOSURE SYSTEM
B. Lens Drive Assembly
1. Removing the Lens Motor
1) Remove the copyboard glass.
2) Move the No. 1 mirror mount to the right end of the scanner rail.
Note:
When moving the No. 1 mirror mount, be sure to hold the middle of the mirror
mount.
3) Remove the two screws
motor assembly
4) Remove the two screws
motor .
3-30
, and disconnect the connector
.
Figure 3-525
, and disconnect the connector
Figure 3-526
COPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
; then, remove the lens
; then, remove the lens