Canon NP6330 Service Manual page 357

CHAPTER 11 TROUBLESHOOTING
• Scanning Lamp Activation Voltage Auto Adjustment in AE Mode [3] No. 304
Making Adjustment
1) Start [3] in service mode, and select No. 304 using the keypad.
• The indicator indicates '304'.
2) Press the OK key.
• The indicator flashes the stored setting.
3) Using the keypad or the Zoom keys, change the settings according to the table
below.
• The indicator flashes the setting.
4) Press the OK key.
• The new setting is stored.
• The indicator stops flashing and remains on.
• A press on the Copy Start key starts copying.
5) Press the key.
• Item selection mode starts, indicating '304'.
• If necessary, execute No. 303.
Item Function
304 AE scanning
intensity
adjustment
11-16
Lighter 7.5
Copy
density 5
Darker
Table 11-203
COPYRIGHT © 1997 CANON INC.
Description
1 2
Test Chart Original
density
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
When the setting
is decreased in
service mode, the
AE copies will be
darker.
If the setting is
increased in
service mode, the
AE copies will be
lighter.