Canon NP6330 Service Manual page 322

No.
5
If you are not installing a paper deck
pedestal, install the lower right cover.
If you are installing any of the above
pedestals, you will not need the lower
right cover.
6
Remove the taping from the scanner
metal fixing found outside the left cover;
then, slide the metal fixing to the right,
and pull it to the front to remove.
• You may like to store away the metal
fixing for possible relocation of the
copier in the future.
Open the copyboard cover, and remove
7
the protection paper.
8 Peel the protection seal off the control
panel.
COPYRIGHT © 1997 CANON INC.
Work
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
Checks/remarks
1
Lower right cover
Scanner fixing
2
9-3