Table of Contents
Advertisement
CHAPTER 11 TROUBLESHOOTING
9
Adjusting the Trailing Edge Margin for Pick-Up from the Multifeeder [3] No. 327
Make adjustments so that the trailing edge margin is 2.5 ±1.5 mm when free-size
copying is executed using the multifeeder.
Making Adjustments
1) Start [3] in service mode, and select No. 327 using keypad.
•
The indicator indicates '327'.
2) Press the OK key.
•
The indicator indicates the stored setting.
3) Using the keypad or the Zoom keys, change the setting.
•
The indicator flashes the setting.
•
To enter a negative setting, press the % key.
4) Press the OK key.
•
The new setting is stored.
•
The indicator stops flashing and remains on.
•
A press on the Copy Start key starts copying.
5) To change the settings in succession, repeat steps 3) and 4).
6) Press the Clear key to return to item selection.
The settings and the image position have the following relationship:
•
For each '1', the margin width changes about 0.4 mm.
•
A higher setting decreases the margin width.
11-20
2.5 ±
1.5 mm
Figure 11-212
COPYRIGHT © 1997 CANON INC.
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Advertisement
Chapters
Table of Contents
Troubleshooting
