Adjusting The Tension Of The Lens Drive Belt; Cleaning The No.4 Mirror - Canon NP6330 Service Manual

CHAPTER 11 TROUBLESHOOTING
4

Adjusting the Tension of the Lens Drive Belt

Move the lens motor support
gauge is 1000 ± 50g when motor support
of the arrow at the point
5

Cleaning the No.4 Mirror

1) Remove the copyboard glass and the lens hood.
2) Remove the screw
11-26
and fit it in place so that the reading of the spring
indicated in Figure 11-220.
Figure 11-220
and the mirror guide plate
Figure 11-221
COPYRIGHT © 1997 CANON INC.
is pulled with a spring gauge in the direction
; then, clean the No.4 mirror.
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)