Canon NP6330 Service Manual page 328

No.
5 Fit the stepped screws as shown, and
install the original tray.
6
Install the copy tray to the delivery
assembly.
Pull out the static eliminator, and clean it
7
with the static eliminator cleaning brush.
Thereafter, set the static eliminator, and
put the cleaning brush back into its
original place.
Turn off the power switch, and
8
disconnect the power plug.
COPYRIGHT © 1997 CANON INC.
Work
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
Checks/remarks
• You may install the original tray on
either left or right.
Stepped screws
Original tray
Static eliminator
cleaning brush
Original tray
Stepped screws
9-9