Canon NP6330 Service Manual page 142

5) Remove the C-ring and the two screws; then, remove the butting roll
case .
6) Remove the two screws
7) Remove the two E-rings, and remove the gear
Remove the two screws, and remove the butting roll
COPYRIGHT © 1997 CANON INC.
Figure 4-341
, and remove the gear mount
Figure 4-342
Figure 4-343
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
.
and the gear .
and the roll case
and the roll
.
4-45