Installing The Drum Unit - Canon NP6330 Service Manual

CHAPTER 9 INSTALLATION
D. Installing the Drum Unit
The copier's photosensitive drum is highly susceptible to light. Exposure to even
room light can cause white spots or black bands on copies. Try to work as quickly as
possible.
No.
1
Keep the developing assembly
unlocked, and open the hopper.
2 Open the drum unit, and remove the
light-blocking sheet.
3
Set the drum unit in the copier, and fix it
in place using the screw removed from
the dummy drum.
4
Fill out the label which comes with the
drum unit, and attach the label to the
cover of the drum unit.
5
Move the knob of the drum unit back
and forth two to three times to clean the
primary charging wire.
6
Put the hopper back into its original
position.
7 Lock the developing assembly in place.
Lock the feeding assembly in place.
8
Attach the connector cover.
9
9-10
Work
COPYRIGHT © 1997 CANON INC.
Checks/remarks
Rail (left)
Be sure to slide in the drum straight
along the rails in the copier.
date counter
compteur
date Datum
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Rail (right)
Drum unit
notes
Zähler
note Notiz