Canon NP6330 Service Manual page 193

2. Removing the Pick-Up Assembly
1) Remove the cassette from the copier.
2) Remove the multifeeder inside cover and the right cover.
3) Remove the front right cover.
4) Disconnect the two connectors
5) Remove the four screws
6) If a pedestal is used, open the pedestal right door, remove the screw
spring , and shift the registration guide
COPYRIGHT © 1997 CANON INC.
of the lifter motor.
, and remove the cassette lifter motor assembly
Figure 5-703
Figure 5-704
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
to the outside.
.
and the leaf
5-47