Pick-Up Assembly; Removing The Pick-Up Roller - Canon NP7160 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
A. Pick-Up Assembly

1. Removing the Pick-Up Roller

1) Remove the cassette.
2) Remove the stepped screw [1], and pull
the roller support plate [2] to the front to
remove.
3) Remove the pick-up roller assembly [3].
4) Push the section indicated by an arrow,
and remove the two pick-up rollers [4].
2. Mounting the Pick-Up Roller
Mount the pick-up roller by reversing the
steps used to remove it and with the following
in mind:
• Match the boss on the pick-up roller and the
cut-off in the holder.
• Do not detach the rubber section of the
pick-up roller.
• When mounting the pick-up roller assembly
to the copier, be sure to position it securely
face up.
5–16
COPYRIGHT © 1998 CANON INC.
[3]
[1]
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
Figure 5-601
[4]
Figure 5-602