Canon NP6330 Service Manual page 137

CHAPTER 4 IMAGE FORMATION SYSTEM
7) Install the charging wire as shown in the figure.
Note:
Keep the following in mind:
• Make sure that the charging wire is free of bends or twists and its gold-plating has
not peeled.
• Make sure that the charging wire is free of slack.
• Make sure that the charging wire is in the V-groove of the height-adjusting roll.
4-40
7mm
spring
Primary charging wire
Figure 4-331
2mm
ring
Transfer charging wire
Figure 4-332
COPYRIGHT © 1997 CANON INC.
height adjusting block
height adjusting block
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
ring
spring