Removing The Blank Shutter Solenoid - Canon NP6330 Service Manual

3. Removing the Blank Shutter Solenoid

1) Remove the blank exposure lamp assembly.
2) Remove the blank exposure assembly upper plate. (See 2. "Removing the Blank
Exposure Lamp.")
3) Remove the screw
shutter.
4) Remove the two screws
shutter solenoid
COPYRIGHT © 1997 CANON INC.
and the spring
Figure 4-313
, and disconnect the connector
by lifting it.
Figure 4-314
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
; then, detach the link arm from the blank
; then, remove the blank
4-31