Table Of Contents - Canon NP6330 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
I. FEATURES.........................................1-1
II. SPECIFICATIONS ..............................1-2
A. Copier ............................................1-2
1. Type..........................................1-2
2. System .....................................1-2
3. Performance .............................1-3
B. Paper Deck Pedestal-M1 ..............1-8
III. NAMES OF PARTS ............................1-9
A. Exterior View .................................1-9
B. Cross Section ................................1-11
1. Body Cross Section..................1-11
2. Paper Deck Pedestal-M1 .........1-12
IV. OPERATION.......................................1-13
A. Control Panel (AB/Inch).................1-13
B. Control Panel (Inch) ......................1-14
C. User Mode .....................................1-17
1. Specifications ...........................1-17
CHAPTER 2 OPERATIONS AND TIMING
I. BASIC OPERATION ...........................2-1
A. Functional Construction.................2-1
B. Outline of the
Electrical Circuitry..........................2-2
C. Basic Sequence ............................2-4
1. Basic Sequence of Operation ..2-4
D. Controlling the Main Motor ............2-6
1. Outline ......................................2-6
2. Operation..................................2-6
E. Inputs to the DC Controller............2-8
1. Input to the
DC Controller (1/5) ...................2-8
2. Input to the
DC Controller (2/5) ...................2-9
3. Input to the
DC Controller (3/5) ...................2-10
COPYRIGHT © 1997 CANON INC.
CONTENTS
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
2. Adjustment/Cleaning ................1-19
V. ROUTINE MAINTENANCE
BY THE USER ...................................1-20
VI. IMAGE FORMATION..........................1-21
A. Outline ...........................................1-21
B. Static Latent Image Formation
Block..............................................1-23
C. Pre-Exposure (step 1) ...................1-23
D. Primary Charging (step 2) .............1-24
E. Image Exposure (step 3) ...............1-24
F. Development (step 4) ....................1-25
G. Transfer (step 5) ............................1-26
H. Separation (step 6)........................1-27
I. Fixing (step 7)................................1-28
J. Drum Cleaning (step 8) .................1-28
VII. AUXILIARY PROCESS ......................1-29
A. Blank Exposure .............................1-29
4. Input to the
DC Controller (4/5) ...................2-11
5. Input to the
DC Controller (5/5) ...................2-12
F. Outputs from the DC Controller.....2-13
1. Output from the
DC Controller (1/5) ...................2-13
2. Output from the
DC Controller (2/5) ...................2-14
3. Output from the
DC Controller (3/5) ...................2-15
4. Output from the
DC Controller (4/5) ...................2-16
5. Output from the
DC Controller (5/5) ...................2-17
G. Inputs to and Outputs from the
Accessories (1/1)...........................2-18
v