Canon NP6330 Service Manual page 141

CHAPTER 4 IMAGE FORMATION SYSTEM
3. Removing the Magnetic Seal (developing cylinder)
1) Remove the developing assembly from the copier.
2) Remove the blade
Note:
The blade must be mounted with high accuracy. Do not remove it on its own in the
field. Rather, remove it together with its mount.
3) Remove the screw
4) Remove the screw
4-44
, and remove the fromt cover
Figure 4-339
, and remove the electrode positioning plate
Figure 4-340
COPYRIGHT © 1997 CANON INC.
.
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.