9.2.9 Adjusting the Separation Roller Pressure
If double feeding or pickup failure oc-
curs during pickup, change the position
for the pressure spring of the separation
roller.
•
If double feeing occurs, move the
spring in the direction of arrow B.
•
If pickup failure occurs, change the
spring in the direction of arrow A.
9.2.10 Orientation of the Separation Roller
Keep the following in mind when replac-
ing the separation roller.
Mounting the separation roller
in the wrong orientation will
lead to interference against
crimping washer. Make sure it is
mounted in the correct orienta-
tion.
COPYRIGHT © 2000 CANON INC.
2000 2000 2000 2000
CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 5 PICK UP/FEEDING SYSTEM
A
B
F05-902-14
Cassette 3/4
Right deck pickup assembly
Wider groove
(front of machine)
Left deck pickup assembly
Narrow groove
Wider groove
F05-902-15
Narrower groove
(rear of machine)
5-59 P