Menu Bar Position - Barco RLM R6+ Performer R9010270 Owner's Manual

13. Display Setup
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Textbox.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to enable/disable the textbox.
7. Press ENTER.
Image 13-2
To enable the menus and dialog boxes again, press the TEXT button on the RCU.

13.3 Menu bar position

What can be done ?
The menu bar can be centered vertically. The range is from the top of the screen to the middle of the screen.
This is useful in applications where the top image content is not displayed (e.g. due to blanking).
Image 13-3
Menu bar move
A Normal position
B New position
How to center the menu ?
1. Press MENU to activate the menu bar.
2. Press → to select the Display setup item. (image 13-4)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Menu bar position menu.
5. Press ENTER.
6. Use ↑ or ↓ to position the menu bar.
120 R5976816 RLM R6+ PERFORMER 02/06/2006