Barco R9841020 Cine VERSUM Master Installation Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. R9841020 Cine VERSUM Master
  6. Installation manual
Barco R9841020 Cine VERSUM Master Installation Manual

Barco R9841020 Cine VERSUM Master Installation Manual

Cine versum system
Hide thumbs Also See for R9841020 Cine VERSUM Master:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
B
P
ARCO
ROJECTION
Cine Versum 120
Cine VERSUM 50
Cine Versum 80
Digital Link
Cine VERSUM Master
C
VERSUM S
INE
YSTEM
R9841020 Cine VERSUM Master/R9001870/R9005010 - R9001870 Cine VERSUM 80
R9005010 Cine VERSUM 50 - R9010090 Cine VERSUM 120
I
M
NSTALLATION
ANUAL
03112003
R5976468/01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R9841020 Cine VERSUM Master and is the answer not in the manual?

Questions and answers

Related Manuals for Barco R9841020 Cine VERSUM Master

Summary of Contents for Barco R9841020 Cine VERSUM Master

  • Page 1 ARCO ROJECTION Cine Versum 120 Cine VERSUM 50 Cine Versum 80 Digital Link Cine VERSUM Master VERSUM S YSTEM R9841020 Cine VERSUM Master/R9001870/R9005010 - R9001870 Cine VERSUM 80 R9005010 Cine VERSUM 50 - R9010090 Cine VERSUM 120 NSTALLATION ANUAL 03112003 R5976468/01...
  • Page 2 Barco nv Home Cinema Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.84.30 Fax: +32 56.36.88.62 E-mail: salesassistantht.bci@barco.com Visit us at the web: www.homecinema.barco.com Printed in Belgium...
  • Page 3 The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period.

  • Page 5: Table Of Contents

    Table of contents TABLE OF CONTENTS 1. Safety Instructions ....................5 1.1 General Safety Instructions .
  • Page 6 Table of contents 7.3.3 Digital Link to More Displays (Loop-through)................. . . 53 7.3.4 Digital Link Cable for long distances.
  • Page 7 Table of contents 17.9Alignment of the Input Balance ..................... . 114 17.9.1Input Balance Selection.
  • Page 8 Table of contents R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 9: Safety Instructions

    The part number and serial number are indicated on the registration plate which is located at the rear of the Cine VERSUM 50, at the bottom of the Cine VERSUM Master, Cine VERSUM 80 and Cine VERSUM 120. Record these numbers in the spaces of the table provided below. Refer to them whenever you call upon your BARCO dealer regarding these products. Name...

  • Page 10: Electrical Safety

    Do not attempt to service the installed modules yourself, as opening or removing covers may expose you to dangerous voltage potential and risk of electric shock! Refer all projector service to a qualified BARCO service center. Call for service in the following conditions : •...

  • Page 11: Safety On Cleaning

    1. Safety Instructions Replacement Parts When replacement parts are required, be sure the service technician has used original BARCO replacement parts or authorized replacement parts which have the same characteristics as the BARCO original part. Unauthorized substitutions may result in de- graded performance and reliability, fire, electric shock or other hazards.

  • Page 12: On Product Specifications

    This display emits weak infrared radiation. If other products controlled with infrared remote controls are placed nearby, remote control function may be affected. In such case, move them further away from the display or contact BARCO authorized dealer or assistance.

  • Page 13: Safety On Installation

    , or dry powder fire extinguishers; never use water on an electrical fire. Always have service performed on this projector by authorized BARCO service personnel. Always insist on genuine BARCO replacement parts. Never use non-BARCO replacement parts as they may degrade the safety of this projector.
  • Page 14 1. Safety Instructions R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 15: Cine Versum System

    2. Cine VERSUM System 2. CINE VERSUM SYSTEM Overview • Digital Video Distribution Concept • Digital Video Distribution Parts 2.1 Digital Video Distribution Concept Structure of the concept The Cine VERSUM is from a concept of view a true digital video distribution system to which at present a 50" Plasma screen - Cine VERSUM 50 - ,a single chip DLP projector based on the HD2 chip - Cine VERSUM 80 - and a 3 chip DLP projector - Cine...

  • Page 16: Cine Versum Master

    This enables enjoying extremely sharp pictures, without reduction in the blacks. A stylish slim design is intentionally chosen to allow easy integration in almost every home environment. BARCO is convinced that the future-oriented Cine VERSUM 50 concept is what the high demanding and critical customer is looking for. The advantages are numerous, as you will see, giving an answer to all the Home Theater lover’s present needs;...

  • Page 17: Cine Versum 80

    2. Cine VERSUM System 2.2.3 Cine VERSUM 80 General Information Based on the ground-breaking DLP™ 16:9 technology, the Cine VERSUM 80 delivers ultra-high quality color images with contrast ratios of over 1100:1 and a light output of 800 ANSI Lumen. The six-segment color wheel enables a pure color reproduction, reducing or completely eliminating all possible visual artifacts.
  • Page 18 2. Cine VERSUM System Image 2-7 Digital link cable Image 2-6 Digital link connectors R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 19: Unpacking

    3. Unpacking 3. UNPACKING Overview • Unpacking Cine VERSUM Master • Unpacking Cine VERSUM 80 • Unpacking Cine VERSUM 120 • Unpacking Cine VERSUM 50 3.1 Unpacking Cine VERSUM Master How to unpack the Cine VERSUM Master The original packing material can be reused to solely ship the Cine Versum Master. When doing so, it is important to use the material in the same way as they were originally shipped.

  • Page 20: Unpacking Cine Versum 80

    3. Unpacking Image 3-2 Ref. No Description Ref. No Description Carton cover top Power cord Carton box Remote Control 2 Manganese AA Batteries, R6P Operating Instruction 3.2 Unpacking Cine VERSUM 80 How to unpack the Cine VERSUM 80 The original packing material can be re-used to solely ship the Cine VERSUM 80. When doing so, it is important to use the material in the same way as they were originally shipped.

  • Page 21: Unpacking Cine Versum 120

    3. Unpacking Image 3-4 Ref. No Description Ref. No Description Carton cover top Power cord Inner carton Remote control Carton box 2 Manganese AA Batteries, R6P Screw and washer (4 Nos) Operating Instruction Ply board 3.3 Unpacking Cine VERSUM 120 How to unpack the Cine VERSUM 120 The original packing material can be re-used to solely ship the Cine VERSUM 120.

  • Page 22: Unpacking Cine Versum 50

    3. Unpacking Image 3-5 Unpacking, Repacking the Cine VERSUM 120 3.4 Unpacking Cine VERSUM 50 How to unpack the Cine VERSUM 50 1. Drawing not available at time of printing. Unpacking material The original packing material can be re-used to safely ship the Plasma Display. When doing so, it is important to use the material in the same way as when they were originally shipped.

  • Page 23: Dimensions

    4. Dimensions 4. DIMENSIONS Overview • Cine VERSUM Master • Cine VERSUM 80 • Cine VERSUM 120 • Cine VERSUM 50 4.1 Cine VERSUM Master Outside dimensions Image 4-1 Outside dimensions Cine VERSUM Master in mm R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 24 4. Dimensions Top/Bottom side dimensions Image 4-2 Top side dimensions in mm Image 4-3 Bottom side dimensions in mm R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 25: Cine Versum 80

    4. Dimensions Air In-/Outlet for Master cooling Image 4-4 Air In-/Outlet Cine VERSUM Master 4.2 Cine VERSUM 80 Outside dimensions Image 4-5 Outside dimensions Cine VERSUM 80 in mm R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 26 4. Dimensions Bottom side dimensions Image 4-6 Bottom side dimensions in mm Air In-/Outlet for projector cooling In order to ensure proper projector cooling, do not block the provided air In- and Outlets of the projector. Image 4-7 Air In-/Outlet for projector cooling R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 27: Cine Versum 120

    4. Dimensions 4.3 Cine VERSUM 120 Outside dimensions Air inlet Cable entrance 315 mm [12.40 inches] 605.2 mm [23.83 inches] 160 mm 315 mm 217.2 mm 225 mm 225 mm [6.30 inches] [12.40 inches] [8.55 inches] [8.86 inches] [8.86 inches] 691.7 mm [27.23 inches] Air outlet...

  • Page 28: Cine Versum 50

    4. Dimensions 4.4 Cine VERSUM 50 Front side dimensions Image 4-10 Front side dimensions in mm Rear side dimensions Image 4-11 Rear side dimensions in mm R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 29 4. Dimensions Air In-/Outlet for Plasma cooling Image 4-12 Air In-/Outlet Cine VERSUM 50 R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 30 4. Dimensions R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 31: Location Of Controls

    5. Location of Controls 5. LOCATION OF CONTROLS Overview • On Cine VERSUM Master • On Cine VERSUM 50 • On Cine VERSUM 80 • Cine VERSUM 120 • On InfraRed Remote Control 5.1 On Cine VERSUM Master Front View The front side of the Cine VERSUM Master is provided with the following controls: Image 5-1 Front side Cine VERSUM Master...

  • Page 32: On Cine Versum 80

    5. Location of Controls The status of the Plasma screen is indicated by a blue LED (3), located at the bottom on the right of the screen. In the same corner an IR Sensor (2) is mounted to allow controlling the Cine VERSUM system via the screen. Image 5-2 Cine VERSUM 50 controls Controls function description...

  • Page 33: Cine Versum 120

    5. Location of Controls Ref. Function Description Infra Red Reception LED indicator Lights up when a valid IR signal from the Remote Control has been captured. Standby LED Lights up continuously: projector in the operation mode. Repeatedly blinks 2 times successively, followed by a long time Off: projector in the standby mode Blinks fast: projector in the cooling down mode after switching off (duration 1 min.).

  • Page 34: On Infrared Remote Control

    5. Location of Controls Ref. Function Description Lights up continuously: projector in the operation mode. Standby LED Lights up repeatedly 2 times short on, 1 time long off: projector in the standby mode Blinks fast: projector in the cooling down mode after switching off (duration 1 min.).
  • Page 35 5. Location of Controls Controls function description Ref. Function Description Function keys To position the PIP image in the displayed image. ADJ (Adjust key) Toggle key to enter or to exit the adjustment mode. Address key To match the address of the RCU with the Cine VERSUM Master (number between 0 and 9).
  • Page 36 5. Location of Controls R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 37: Installation Guidelines

    6. Installation Guidelines 6. INSTALLATION GUIDELINES Overview • Projector Installation Guidelines • Plasma Screen Installation Guidelines 6.1 Projector Installation Guidelines Overview • General Installation Guidelines • Image Projection 6.1.1 General Installation Guidelines Before installing the projector, read first the safety instructions. Temperature and humidity conditions •...

  • Page 38: Image Projection

    6. Installation Guidelines Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a determined amount of light projected toward them. The ‘GAIN’ of a screen is the term used. Front and rear screens are both rated in terms of gain. The gain of screens range from a white matte screen with a gain of 1 (x1) to a brushed aluminized screen with a gain of 10 (x10) or more.
  • Page 39 Front Projection (Ceiling-Table mounted) Image 6-1 Front projection Table standing Ceiling mounted It is recommended that you use the optional BARCO ceiling-mount bracket to mount the projector to the ceil- ing. Projection Using a Mirror Image 6-2 Rear: Mirror projection...

  • Page 40: Projector Distance Adjustment

    6. Installation Guidelines It is recommended that you use the optional BARCO ceiling-mount bracket to mount the projector to the ceil- ing. 6.1.2.3 Projector distance adjustment Cine VERSUM 80: Calculation of the projector distance PD Place the projector at the required distance from the screen according to the desired screen size. The required distance can be calculated with the formula added to the drawing below.
  • Page 41 6. Installation Guidelines Image 6-5 Calculation of the projector distance (PD) Below table of the lenses (available at time of printing) Lenses Metric formulas (meter) Inch formulas (inch) CineVERSUM™(1.2 - 1.44 : 1) Wide PD = 1.2 x SW PD = 1.2 x SW Tele PD = 1.44 x SW PD = 1.44 x SW...

  • Page 42: Projector Installation Requirements

    6. Installation Guidelines 6.1.2.4 Projector installation requirements Cine VERSUM 80: Installation requirements • Position the projector perpendicular to the screen and leveled to achieve an optimal image. An inclination of the projector is allowed but limited to 10° in one direction (. The latter generates image distortion (keystoned) which can be corrected using the projector’s menu system.
  • Page 43 6. Installation Guidelines When the height of the projected image is adjusted, the image may become distorted (keystoned), depending on the relative posi- tions of the projector and the screen. How to adjust the keystone correction, see "Keystone Correction", page 110. Optical Axis Projector Lens Optical Axis Projector Lens Image 6-8...

  • Page 44: Ceiling Mount For Cine Versum 80 Cine Versum 120

    6. Installation Guidelines 6.1.2.6 Ceiling Mount for Cine VERSUM 80 Cine VERSUM 120 View Ceiling Mount assembly R9841750 Image 6-10 Ceiling mount for Cine VERSUM 80 For more details about the ceiling mount Cine VERSUM 80, see the concerning installation manual. R9842330 Image 6-11 Ceiling mount for Cine VERSUM 120...

  • Page 45: Plasma Screen Installation Guidelines

    This unit incorporates a thin design. To ensure safety if vibrated or shaken, please be sure to take measures to prevent the unit from tipping over. Way of installing the unit Two kits are designed by BARCO for the installation of the unit, a Wall and a Table mount kit. 6.2.2 Installation using the Wall mount kit How to install the Wall mount kit 1.

  • Page 46: Installation Using The Table Mount Kit

    6. Installation Guidelines This side has to be fixed to the plasma backplane M8x20 (for fixing support plate to plasma backplane) Image 6-14 Wall mount assembly Image 6-15 Dimensions wall mount assembly 6.2.3 Installation using the Table mount kit How to install the Table mount kit 1.
  • Page 47 6. Installation Guidelines Image 6-16 Table mount assembly R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 48 6. Installation Guidelines R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 49: Connections

    7. Connections 7. CONNECTIONS Overview • Power Supply Connection • Connection for Preview and Communication • Digital Link to Display Modules • Connection to Video Equipment 7.1 Power Supply Connection 7.1.1 Supplied Power Cords The following power cords are added to the product In the package of each product, two power cords are added, one with a plug shape, reference standard ANSI C73.11, and one with a plug shape, reference CEE (7).

  • Page 50: Power Connection Cine Versum 80

    7. Connections Image 7-5 Insertion of the power plug AC Power Specifications AC Power Voltage Auto Range 100 – 240V AC Power Current 1 A / 50 – 60 Hz Main Fuses Standby Power Supply: T 2AH/250V Main Power Supply: F 4A L 250V Power Consumption Normal operation mode 78 W...

  • Page 51: Power Connection Cine Versum 120

    7. Connections AC Power Specifications Auto Range 100 – 240V AC Power Voltage AC Power Current 3 A – 1.5 A/ 50 – 60 Hz Main Fuse Main Power Supply: T4A H 250V Power Consumption Normal operation mode 270 W Standby mode 7.1.4 Power Connection Cine VERSUM 120...

  • Page 52: Connection For Preview And Communication

    7. Connections Image 7-10 AC Power Specifications AC Power Voltage Auto Range 100 – 240V AC Power Current 4.0 –1.5 A / 50 – 60 Hz Main Fuse Standby Power Supply: T 2AH/250V Main Power Supply: F 10AH/250V Power Consumption Normal operation mode 350 W Standby mode...

  • Page 53: Connection For Communication

    7. Connections Image 7-11 Monitor connection Analog Output Timings Vertical Sync NTSC PC/no signal Period 20 msec 16.7 msec 16.7 msec Sync Width 514 µsec 428 µsec 428 µsec Back Porch 27.8 µsec 23 µsec 23 µsec Front Porch 2.58 msec 1.26 msec 1.26 msec 16.9 msec...

  • Page 54: Network Connection

    7. Connections Image 7-12 Communication connection RS232/422 IN RS232/422 OUT Ref. Ref. Description DCD_IN Data Carry Detect RXD+/DSR_IN RXD+/DSR_OUT Read Data/Data Set Ready RXD-_IN Read Data RXD-_OUT TXD-_IN TXD-_OUT Transmit Data CTS_IN Clear To Send TXD+/DTR_IN TXD+/DTR_OUT Transmit Data/Data Terminal Ready RI_IN Ring Indicator 5/10...

  • Page 55: Digital Link To Display Modules

    Master over a total cable length of 1280 meters! BARCO’s Cine VERSUM System digital link comes in two different versions: a flexible cable for shorter distances (SL link) and a more shielded, rigid cable for longer distances (XL link). The length of the rigid cable can be custom made according to the requirements of each individual installation, up to a maximum length of 40 meters.

  • Page 56: Digital Link To One Display

    7. Connections 7.3.2 Digital Link to One Display How to link The digital output module on the Cine VERSUM Master is provided with one single output cable connector for SL type cable (for both video and communication). Insert the plugs of the patch cord respectively into High Speed Link OUT on the digital module of the Cine VERSUM Master and Link IN on the Cine VERSUM 50 (image 7-14),Cine VERSUM 80 (image 7-15), or Cine VERSUM 120 (image 7-16) To preserve image performances, limit the length of the patch cable, when using cable of type SL, to 15 m.

  • Page 57: Digital Link To More Displays (Loop-Through)

    7. Connections Image 7-16 Digital link with Cine VERSUM 120 7.3.3 Digital Link to More Displays (Loop-through) How to link (e.g. a Cine VERSUM 50, a Cine VERSUM 80 and a Cine VERSUM 120) The digital output module on the Cine VERSUM Master is provided with one single output cable connector for SL type cable (for both video and communication) with loop-through possibility on the Display Modules.

  • Page 58: Digital Link Cable For Long Distances

    7. Connections Image 7-17 Digital link with Cine VERSUM 50, Cine VERSUM 80 and Cine VERSUM 120 7.3.4 Digital Link Cable for long distances Which cable has to be used The XL cable allows the link for distances of up to 40m between each module. As such it is possible to connect up to a maximum of 32 different Cine VERSUM System display modules to one single Cine VERSUM Master over a total cable length of 1280m.

  • Page 59: Connection To Video Equipment

    7. Connections Image 7-19 Digital linking long distance via wall outlet 7.4 Connection to Video Equipment Overview • Input Connection per Module • Installation of an Input module General The Cine VERSUM Master acts as the control unit of the complete Cine VERSUM System. It can be equipped with up to 8 digital and analog input modules which enable it to process all types of video, component video, RGB, SDI, HD-SDI, DVI and any future video standardizing.

  • Page 60: Input Connection Per Module

    7. Connections 7.4.1 Input Connection per Module Video Input module Image 7-21 Video Input module Input mode Signal format (1), (2) or (3) selectable Decoder Digital Multistandard Decoder, running at twice the oversampling rate (27 MHz). - PAL, PAL M, PAL N - NTSC, NTSC M, NTSC Japan, NTSC 4.43 - SECAM Comb Filter...

  • Page 61: Sdi Input

    7. Connections Input mode Signal format (1), (2), (3) or (4) selectable on the GUI menu Bandwidth 500 MHz RGB Analog Bandwidth convertor Signal support Supports signals up to 205 MHz Pixel clock (1600 x 1200 @ 75 Hz) Sync Detection Automatic Sync detection for: RGBHV, RGBS and RGsB.

  • Page 62: Installation Of An Input Module

    7. Connections Features - Loop through HD-SDI Input (HD-SDI in/HD-SDI out) - For HD-DVD players and other HD Video equipment with HD-SDI out. Digital Visual Interface Input (DVI) DVI: Digital Visual Interface is a display interface developed in repose to the proliferation of digital flat panels displays.
  • Page 63 7. Connections Image 7-28 Image 7-27 Image 7-29 R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 64 7. Connections R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 65: Operating The Remote Control

    8. Operating the Remote Control 8. OPERATING THE REMOTE CONTROL Overview • Battery Insertion in the Remote Control • Operating the Remote Control • Address setting for the Remote Control 8.1 Battery Insertion in the Remote Control – Insert batteries so that the plus (+) and minus (-) sides are aligned according to the markings in the battery case.

  • Page 66: Operating The Remote Control

    8. Operating the Remote Control Image 8-3 Battery removal 8.2 Operating the Remote Control Remote Control operation This remote control includes a battery powered infrared transmitter which allows the user to control the Cine VERSUM Master re- motely via its own built-in infrared receiver or via the infrared receivers built-in in the linked displays. If backlight and RC operation indicator lights up too long or continuously, batteries need to be replaced.

  • Page 67: Address Setting For The Remote Control

    8. Operating the Remote Control Remote control operation’s difficulties • The remote control unit may not operate if there are objects placed between it and the display. • Operational distances will gradually become shorter as the batteries begin to wear out, replace weak batteries with new ones as soon as possible.
  • Page 68 8. Operating the Remote Control R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 69: Points Of Similarity Between Graphical Display And On Screen Menus

    9. Points of Similarity between Graphical display and On Screen Menus 9. POINTS OF SIMILARITY BETWEEN GRAPHICAL DISPLAY AND ON SCREEN MENUS 9.1 Explanation about differences in menu displays Purpose The different adjustment items are structured in main and sub menus. The way of showing the menus is different between the Cine VERSUM Master and the linked displays, but the subject matter of the menus is similar.

  • Page 70: On Screen Display

    9. Points of Similarity between Graphical display and On Screen Menus Graphical Display On Screen Display on Cine VERSUM Master CV50, CV80 and CV120 Main menu Main menu Cine VERSUM Image settings CineVERSUM Advanced Settings Image settings >Installation Advanced Settings Service 7 xga75_gs.c03 Installation...

  • Page 71: On Screen Display

    9. Points of Similarity between Graphical display and On Screen Menus Graphical Display On Screen Display on Cine VERSUM Master CV50, CV80 and CV120 Sub menu Sub menu Input slots Installation Installation File service >Display list Input slots 7 xga75_gs.c03 Internal pattern File services When no signal...
  • Page 72 9. Points of Similarity between Graphical display and On Screen Menus R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 73: Overview Gui Menu Screens

    10. Overview GUI Menu Screens 10. OVERVIEW GUI MENU SCREENS Overview • Overview Main menu • Overview Image Settings • Overview Advanced Settings • Overview Installation • Overview Service 10.1 Overview Main menu Main Menu CV80 Plasma CV120 Main Menu Image Settings Image Settings Image Settings...

  • Page 74: Overview Image Settings

    10. Overview GUI Menu Screens 10.2 Overview Image Settings Main Menu-Image Settings Main Menu Brightness 125 Image Settings Contrast 125 Via Master Image Settings Master Brightness Contrast Saturation 125 Saturation Tint 125 Tint Display Back For NTSC video signals only If 1 display in the link Brightness 0 CineVERSUM...

  • Page 75: Overview Advanced Settings

    10. Overview GUI Menu Screens 10.3 Overview Advanced Settings Main Menu-Advanced Settings Main Menu Horizontal Shift Advanced Settings Aspect Ratio +255 -255 *16:9 Horizontal Size Position +511 2.35 -511 Horizontal Shift 1.88 Horizontal Size 1.78 Vertical Shift Vertical Shift Letterbox Vertical Size +255 Back...

  • Page 76: Overview Installation

    10. Overview GUI Menu Screens 10.4 Overview Installation Main Menu-Installation 1 Main Menu Input Slots Slot Modue Type Installation 1 1 NO MODULE 2 NO MODULE Input Slots Video 3 VIDEO [VIDEO] S-Video 4 SDI File Service 1 Total Pixels 864 5 DVI 0----------4095 6 NO MODULE...

  • Page 77: Main Menu

    10. Overview GUI Menu Screens Main Menu-Installation 2 Rename File Rename File Message video625 .c01 0 1024x278i Enter new value Save Data Main Menu vid525_2 .c03 0 692x240i vid525_2 .c03 Back Installation 2 Copy File vid625_2 .c01 3 692x285i File Service 2 File Service xga75_gs.c02 7 1030x768 Load...

  • Page 78: Display Settings

    10. Overview GUI Menu Screens Main Menu-Installation 4 Run Times Display Info Display Main Menu Serial nr: 25416345 Total:197 h Type: CineVERSUM 80 Lamp Installation 4 Date: xx/xx/xx Total: 195 h Temperature: 52 <35:4 h Display List Runtime: 87h 35-45: 14 h Software: 0.32 45-50: ;35 h Display Settings...

  • Page 79: Overview Service

    10. Overview GUI Menu Screens 10.5 Overview Service Main Menu-Service Identification Main Menu Cine VERSUM Master IR Address: Service Soft Version: 1.23 Baudrate PC: 115200 Serial no: 0000000 Runtime: 135h Link Time Jul 17 2002 Yes or No 11:51:28 CineVERSUM Password Back Image settings...
  • Page 80 10. Overview GUI Menu Screens R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 81: Powering On/Off The Cine Versum System

    11. Powering on/off the Cine VERSUM System 11. POWERING ON/OFF THE CINE VERSUM SYSTEM Getting started After power, source and link cables have been installed, proceed to start up of the Cine VERSUM System. Overview • Powering ON the Cine VERSUM System •...

  • Page 82: Display Info 'New Display' And 'Lost Display

    11. Powering on/off the Cine VERSUM System Status of the modules in the system (Case B) Status modules Cine VERSUM Master, Cine VERSUM 50, Cine VERSUM 80 and Cine VERSUM 120 in standby mode. Standby LED on Cine VERSUM Master Blinks (0.2s on/2s Off) Standby LED on Connected Display Blinks (0.2s on/2s Off)
  • Page 83 11. Powering on/off the Cine VERSUM System Message Lost display CineVERSUM _________ Menu 11-5 R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 84 11. Powering on/off the Cine VERSUM System R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 85: Image Projection After Powering Up

    12. Image Projection after Powering Up 12. IMAGE PROJECTION AFTER POWERING UP Overview • Image Projection Using the Jog Dial on Cine VERSUM Master • Image Projection Using the Remote Control • Lamp Mode Set Up for Cine VERSUM 120 Only Picture display can be started up using the selection wheel on the Cine VERSUM Master or using its Remote Control.

  • Page 86: Lamp Mode Set Up For Cine Versum 120 Only

    12. Image Projection after Powering Up How starting the image projection (Case C) 1. Press the ADJ or ENTER key (On InfraRed Remote Control, page 30). Menu on graphical display changes as follows –menu 12-1. 2. Press the cursor keys ↑ or ↓ to select item ’Power Up’ (arrow in front of item). 3.

  • Page 87: 2Lamp Mode Set Up Economic/Normal (Image Settings Menu)

    12. Image Projection after Powering Up 12.3.2 Lamp Mode Set Up Economic/Normal (Image Settings menu) How to set up: 1. Enter the MAIN menu and scroll through the sub menus, using the jog dial or the Remote Control until the Image Settings menu is displayed.
  • Page 88 12. Image Projection after Powering Up R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 89: Projection Stop (Standby Or Economic Standby Mode)

    13. Projection Stop (Standby or Economic Standby mode) 13. PROJECTION STOP (STANDBY OR ECONOMIC STANDBY MODE) Overview • Projection Stop Using the Selection Wheel • Projection Stop Using the Remote Control Economic Standby for the Cine VERSUM Master only: in this mode, the power dissipation is reduced and the system stays operational for re-start of the system.

  • Page 90: Projection Stop Using The Remote Control

    13. Projection Stop (Standby or Economic Standby mode) 13.2 Projection Stop Using the Remote Control Overview • Direct System Shutdown (standby) • System Shutdown (standby) via screen menu 13.2.1 Direct System Shutdown (standby) The On Screen menus on the Cine VERSUM 50, Cine VERSUM 80 and Cine VERSUM 120are with respect to content identic.
  • Page 91 13. Projection Stop (Standby or Economic Standby mode) After the power down time, the standby LED on the Cine VERSUM 80 stays blinking on a beat of 0.3s on, 0.3s off for approximately 1 minute, named the cool down time. A new start up command will be executed after the cool down period only.
  • Page 92 13. Projection Stop (Standby or Economic Standby mode) R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 93: Switching Linked Displays To And Out Standby

    14. Switching linked displays To and Out Standby 14. SWITCHING LINKED DISPLAYS TO AND OUT STANDBY Overview • Switching by means of the Cine VERSUM Master • Direct Switching of the Linked Display 14.1 Switching by means of the Cine VERSUM Master Overview •...

  • Page 94: 2Switching In/Out Standby Using The Remote Control

    14. Switching linked displays To and Out Standby Message Command sent to display _______________________________ _______________________________ _______________________________ Menu 14-5 Recap If the status of a display is On, via the display settings menu the display can be switched into the standby mode. If the status of a display is Standby, then the display can be switched to the operation mode.

  • Page 95: Direct Switching Of The Linked Display

    14. Switching linked displays To and Out Standby Message Command sent to display Menu 14-10 Recap If the status of a display is On, via the display settings menu the display can be switched into the standby mode. If the status of a display is Standby, then the display can be switched to the operation mode.
  • Page 96 14. Switching linked displays To and Out Standby R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 97: Module Address Read Out/Change

    15. Module Address Read out/Change 15. MODULE ADDRESS READ OUT/CHANGE 15.1 Default address of the Modules Introduction To allow separate remote access to the different modules, an individual address has to be stored in each module. Overview default address modules Each module leaves the factory with a default address: Module Address...

  • Page 98: 2Changing The Stored Addresses

    15. Module Address Read out/Change Reading out the stored address using Display setting menu (exclusive Cine VERSUM Master) 1. Using the jog dial on the Cine VERSUM Master or the Remote control keys, successively selects Main menu, Installation and Display list. The display list (On screen,menu 15-4;...
  • Page 99 15. Module Address Read out/Change Image 15-1 Example of address set up Changing the stored address of a linked display 1. Successively scroll through the menus Main (Cine VERSUM System), Installation, Display list. 2. Select in the display list the display you desire to change the address. 3.
  • Page 100 15. Module Address Read out/Change Changing the stored address of the Cine VERSUM Master 1. Successively scroll through the menus Main (Cine VERSUM System), Service. 2. Select in the Service list item IR Address 001 3. Press the jog dial or press ENTER to confirm. A text box appears on the screen (menu 15-11) and in the graphical display (menu 15-12) requesting to enter a new 3 digit address value.

  • Page 101: Input Source File Service

    16. Input Source File Service 16. INPUT SOURCE FILE SERVICE Overview • About Stored files • Loading a File • Editing a File • File identification • Rename a file • Copy a file • Delete a file • Delete all files •...
  • Page 102 16. Input Source File Service 4. Select item FILE SERVICE by rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control (menu 16-2). 5. Press the selection wheel on the Master or the key ENTER on the Remote Control to confirm. The sub menu FILE SERVICE appears on-screen and in the graphical display.

  • Page 103: Editing A File

    16. Input Source File Service 16.3 Editing a File How to Edit a File 1. Select the FILE SERVICE menu (see "Loading a File", page 97) 2. Select item EDIT by rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control. The sub menu EDIT FILE (menu 16-7) appears on-screen and in the graphical display.
  • Page 104 16. Input Source File Service Explanation of the Edit file menu items Menu Item Explanation Horizontal Total Pixels If the value for ’Horizontal Total pixels’ is wrong, sampling mistakes, small vertical bars will be seen in the image (Total numbers of pixels between 2 sync pulses is used to adjust the sampling rate). Select ’Total’...
  • Page 105 16. Input Source File Service Option Item Explanation Vertical Synchro The vertical refresh can be synchronized with the leading or trailing sync edge. Default setting is Polarity [Leading]. Toggling to [Trailing] is only necessary for special applications where the trailing edge of the synchro signal has to be taken as a reference.

  • Page 106: Rename A File

    16. Input Source File Service Artefacts Undesirable elements or defects in a video picture. These may occur naturally in the video process and must be eliminated in order to achieve a high-quality picture. Most common in analog are cross color and cross luminance. Most common in digital are macroblocks, which resemble pixelation of the video image.

  • Page 107: Delete A File

    16. Input Source File Service 5. Continue with filling in the other characters consecutively as follows: Pressing the cursor keys ↑ or ↓ on the Remote Control or rotating the selection wheel on the Master allows to select the characters. Pressing the cursor keys ←...

  • Page 108: Delete All Files

    16. Input Source File Service 16.8 Delete all files How to delete ALL files 1. Select the FILE SERVICE menu (see "Loading a File", page 97 2. Select item DELETE ALL by rotating the selection wheel on the Master or the ↑ or ↓ keys on the Remote Control. A confirmation request menu appears on-screen and in the graphical display.

  • Page 109: Adjusting The Picture

    17. Adjusting the Picture 17. ADJUSTING THE PICTURE Overview • Setup Video and RGB module for the input signal type • Adjusting the Image Orientation • Adjusting the Image Aspect Ratio • Adjusting the Decoding Standard • White Peak Set up •...

  • Page 110: Adjusting The Image Orientation

    17. Adjusting the Picture 8. Repeat the same action for all installed Video and RGB modules. 9. Leave the GUI menus: Using the jog dial on the Master: scroll in the menu to the bottom until item ’Back’ is pointed and press to confirm. Repeat the same action if necessary.

  • Page 111: Adjusting The Image Aspect Ratio

    17. Adjusting the Picture 8. Select the Orientation item which suit the projector mounting by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control. 9. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm. The projector fits to the selected image orientation and the system returns to operation automatically after a few seconds.
  • Page 112 17. Adjusting the Picture 5. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm. The sub menu ASPECT RATIO appears on-screen and in the graphical display, including all available aspect ratios. (menu 17-10) Explanation Aspect Ratio Description...

  • Page 113: Adjusting The Decoding Standard

    17. Adjusting the Picture 17.4 Adjusting the Decoding Standard About Decoding Standard The possibility is offered to decode the NTSC video signals via the default American IRE standard (Decoding a NTSC signal using the European EBU standard may result in a greenish tint.) and the PAL/SECAM video signals via the European EBU standard. When the PROJECTOR standard has been chosen, then, video signal are decoded based on the installed Color Parameters.

  • Page 114: Keystone Correction

    17. Adjusting the Picture Main Menu/ Image Settings Display CV80 or CV120 Primaries CV80 CineVERSUM If the CV80 is the only display in the link Image Settings Image settings Image Settings Display Advanced Settings Master Brightness Installation Brightness Contrast Service Contrast Gamma 1 NO MODULE...

  • Page 115: 2Applying The Keystone Correction

    17. Adjusting the Picture 4. Select item GLOBAL KEYSTONE: YES by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control (menu 17-12). 5. Set Global Keystone to Yes or to No, using the jog dial on the Master or the key ENTER on the Remote Control as toggle switch. Confirmation YES: Keystone correction will be applied to ALL files.

  • Page 116: Adjusting The Image Shift And Size

    17. Adjusting the Picture 17.7 Adjusting the Image Shift and Size Overview • Adjusting the Image Shift • Adjusting the Image Size 17.7.1 Adjusting the Image Shift How to adjust the Vertical and Horizontal image shift 1. Select the ADVANCED SETTINGS menu (menu 17-8). 2.

  • Page 117: 2Adjusting The Image Size

    17. Adjusting the Picture 17.7.2 Adjusting the Image Size How to adjust the Vertical and Horizontal image size 1. Select sub menu POSITION (Adjusting the Image Shift, page 112) 2. Select the SIZE item, vertical or horizontal, you desire to adjust by rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control.

  • Page 118: Alignment Of The Input Balance

    17. Adjusting the Picture Adjust the blanking: With the Remote Control: press the ← or → key to adjust the blanking level. With the jog dial on the Master: rotate the jog dial to the left or to the right. 7.

  • Page 119: 1Input Balance Selection

    17. Adjusting the Picture Advanced Settings Aspect Ratio Position Pip Configuration Blanking Phase Input Balance Back Menu 17-19 The ’Default Input Balance’ is used to align the input balance of the different modules referring to standard input signals. As standard input signals are required for the alignment of the Default Input Balance, this alignment has to be consider as FACTORY ALIGNED.

  • Page 120: 2Input Balance Adjustment

    17. Adjusting the Picture 17.9.2 Input Balance Adjustment How to adjust the Input Balance Always start with the Black balance adjustment if a dominant color has been observed in both areas. 1. Select in the Input Balance menu item BLACK BALANCE and confirm. A sub menu appears on-screen and in the graphical display, showing the adjustable items Black Level RED and BLUE.

  • Page 121: Phase Adjustment For Computer Signals

    17. Adjusting the Picture 17.10Phase adjustment for Computer signals About Phase adjustment When displaying computer patterns or graphics which are very detailed (tilting, vertical stripes, etc..) jitter in picture (missampling) may occur , causing horizontal stripes in portions of the screen. Should this occur, adjust ’Phase’ for optimum computer image. How to adjust the Phase 1.

  • Page 122: Adjusting The Color Temperature

    17. Adjusting the Picture Only for the Cine VERSUM 80 HD2, three Gamma tables are added to the list, named Film, Graphics and Video. How to set up the Gamma value 1. Enter the MAIN menu and select the sub menu IMAGE SETTINGS, using the jog dial or the Remote Control. (image 17-11) Depending the addressed unit: Master: The global Image settings menu is displayed, inclusive the menu item DISPLAY.

  • Page 123: 1Selecting The Preset Color Temperature

    17. Adjusting the Picture About Color Temperature setting This function can be used to adjust the color temperature to suit the type of image input to the display unit (DVD, Video, Computer image, TV broadcast etc..) The Color Temperature menu will include 5 fixed values. To allow the customer to adjust the Color Tempera- ture to his own taste, item Customer Balance has been added to the menu.

  • Page 124: 2Customizing The Color Temperature

    17. Adjusting the Picture Main Menu/ Image Settings Display CV80-CV50-CV120 Color Temperature White (X): 0.313 Set Color coordinates White (Y): 0.329 for white to adjust Front control adjust X Color Temperature Push to accept White (X): 0.313 Arrow Left/Right adjust X White (Y): 0.329 Arrow Up/Down adjust Y Back...
  • Page 125 17. Adjusting the Picture 7. Adjust the respective Gain levels, by rotating the jog dial on the Master or the ← and → keys on the Remote Control, until the desired Color Temperature has been reached. 8. Press EXIT on the Remote Control or select item BACK in the menus to return. Color Temperature Custom Balance *Display White...

  • Page 126: Adjusting The Picture Controls

    17. Adjusting the Picture 6. Proceed to the X-Y adjustment, using the Remote Control: Select a coordinate to be modified by pressing the ↑ or ↓ key on the Remote Control and press ENTER to confirm. A new sub menu opens allowing to adjust, by pressing the ↑ or ↓ keys the Y-value and by pressing ← or → keys the X-value. Press EXIT to return.

  • Page 127: 1Master Adjustment Of The Analog Controls

    17. Adjusting the Picture 17.13.1Master Adjustment of the Analog Controls How to adjust the analog controls 1. From the main menu, select item IMAGE SETTINGS. Note: When using the Remote Control, make sure that the address of the RC is the common or the Master address! The Image Settings menu appears on-screen and in the graphical display on the Master, showing the two main items ’Master’...

  • Page 128: 1Via Cine Versum Master

    17. Adjusting the Picture 17.13.2.1Via Cine VERSUM Master Chapter below is a continuation of procedure, see "Master Adjustment of the Analog Controls", page 123. About Image Settings menu When adjusting the analog controls separately on the linked display, then the items in the Image Settings menu depends on the addressed display.

  • Page 129: 2Via Display With Remote Control Only

    17. Adjusting the Picture 6. Adjust the level of the analog control, with default value the Master setting, by rotating the jog dial on the Master or pressing the ←or→key on the Remote Control. Selected Item Pressing Key←or jog dial to the left Pressing Key→...
  • Page 130 17. Adjusting the Picture 4. Adjust the level of the analog control, with default value the Master setting, by pressing the ←or→key on the Remote Control. Selected Item Pressing Key← Pressing Key→ Brightness For less brightness For more brightness Contrast For less contrast For more contrast 5.

  • Page 131: Additional Settings Cine Versum Master

    18. Additional settings Cine VERSUM Master 18. ADDITIONAL SETTINGS CINE VERSUM MASTER Overview • Output Resolution set up • Display Internal Generated Pattern • Shutdown Automatic when no signal • Source Transition • On Screen Display Configuration • On-Screen Display Language •...

  • Page 132: Display Internal Generated Pattern

    18. Additional settings Cine VERSUM Master Image 18-1 Picture on display Image 18-2 Picture on display 18.2 Display Internal Generated Pattern How to display an internal pattern In total 10 different internal patterns (Generated in the Cine VERSUM Master) can be displayed instead of the selected source. To select a pattern, carry out the following steps: 1.

  • Page 133: Shutdown Automatic When No Signal

    18. Additional settings Cine VERSUM Master Image 18-3 Available testpatterns 18.3 Shutdown Automatic when no signal How to setup the automatic shutdown If no input signal is available for a delay of minimum 40 seconds, the Cine VERSUM Master can be setup for automatic shutdown (Standby mode).

  • Page 134: Source Transition

    18. Additional settings Cine VERSUM Master 18.4 Source Transition Source transition Seamless transition mode can be applied during input source switching. There is a choice between 14 different effects which render the transitions more enjoyable. How to enter the source transition effect 1.
  • Page 135 18. Additional settings Cine VERSUM Master Image 18-4 • Press the key TEXT on the Remote Control. The OSD’s, included Menu, Bar scale and Message are disabled. To reactivate the OSD, press the key TEXT again. Attention, only the OSD’s (including MENU, BAR SCALE and MESSAGE) with status ’On’ will be active again.

  • Page 136: 3On Screen Display Position Alignment

    18. Additional settings Cine VERSUM Master 18.5.3 On Screen Display Position Alignment How to define the position of the OSD The position of the OSD for the Menu and the Bar scale is adjustable. The vertical and the horizontal position of the OSD are adjustable and are located in the menu below the respective OSD name, Menu position and Bar scale position.

  • Page 137: Display Name Change

    18. Additional settings Cine VERSUM Master 18.7 Display Name Change Where to find the display RENAME function Main Menu/ Installation Display List Display Settings Cine VERSUM 80 Cine VERSUM 120 Cine VERSUM 50 Installation Display Settings Display Settings Display Settings Input Slots Switch OFF Switch OFF...
  • Page 138 18. Additional settings Cine VERSUM Master R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 139: Picture In Picture (Pip)

    19. Picture in Picture (PIP) 19. PICTURE IN PICTURE (PIP) Overview • Turning On/Off the Picture in Picture • Selecting Input Source for PIP Window • Configuration of the PIP Window What is Picture in Picture If PIP is enabled, a window is inserted in the active image, in which the image of another selected input source will be displayed. The position and the size of the window is adjustable.

  • Page 140: Configuration Of The Pip Window

    19. Picture in Picture (PIP) Image 19-1 Picture in Picture When a PiP window is on the screen, zapping over inputs change only the PiP window. When the same source is pressed twice, the selected source becomes the main window and the PiP window disappears. 19.3 Configuration of the PIP Window How to configure the PIP window manually 1.
  • Page 141 19. Picture in Picture (PIP) • F1-F2-F4 and F5: changing the place of the PIP window in the projected image. Image 19-3 Position of the PIP window • F1-F2-F4 and F5: enlarging the PIP window when pressed a second time. Image 19-4 PIP window enlarged Normal PIP window...
  • Page 142 19. Picture in Picture (PIP) R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 143: Cine Versum Master Settings & Info

    20. Cine VERSUM Master Settings & Info 20. CINE VERSUM MASTER SETTINGS & INFO Overview • Service Menu • Cine VERSUM Master Identification • Cine VERSUM Master Password • Cine VERSUM Master Address Entering the Installation as well as the Service menu can be password protected. If this should be the case, trying to enter both menus is preceded by a pop up menu, requesting to enter password.

  • Page 144: Cine Versum Master Password

    20. Cine VERSUM Master Settings & Info Explanation about the identification items The identification menu shows the general information of the Cine VERSUM Master status. • IR Address: typical address of the Cine VERSUM Master, to be used by the Remote Control to allow communication. •...

  • Page 145: Cine Versum Master Address

    20. Cine VERSUM Master Settings & Info How to change the password 1. Select item MODIFY PASSWORD by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control. 2. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm. The sub menu NEW PASSWORD appears on-screen and in the graphical display, including the possibility to enter 4 digits, composing the new password.

  • Page 146: 2Cine Versum Master Address Change

    20. Cine VERSUM Master Settings & Info Reading out the stored address in the Cine VERSUM Master • Point the front of the Remote Control at the IR sensor of the Cine VERSUM Master. • Press the address key on the Remote Control. Image 20-1 •...

  • Page 147: 3Selecting The Transmission Speed

    20. Cine VERSUM Master Settings & Info 20.4.3 Selecting the Transmission Speed How to set the transmission speed of the RS232 connection 1. Select item SERIAL COMMUNICATION in the Service menu by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control.

  • Page 148: 5Rs422 Data Bus Termination

    20. Cine VERSUM Master Settings & Info 20.4.5 RS422 data bus termination How to terminate the RS422 data bus The last control unit on the RS422 data bus has to be terminated. 1. Select item TERMINATION in the Serial Communication menu by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control (Selecting the Transmission Speed, page 143.).

  • Page 149: Maintenance Indicators

    21. Maintenance Indicators 21. MAINTENANCE INDICATORS Overview • Display Information • Display Diagnosis • ColorWheel IndexCine VERSUM 80 • Test Pattern 21.1 Display Information What info is displayed Main Menu/ Installation Display List Display Settings Display Info Display Info Cine VERSUM 50 Serial nr: 25416345 Type: CineVERSUM 50 Display Settings...
  • Page 150 21. Maintenance Indicators Common for Cine VERSUM 50 – Cine VERSUM 80 and Cine VERSUM 120 Runtime Total operation time of the display Software Installed software Deserializer Converts the serial data into parallel data For Cine VERSUM 80 only Formatter Serial number Lamp type Kind of the display...

  • Page 151: Display Diagnosis

    21. Maintenance Indicators 21.2 Display Diagnosis What info is displayed Main Menu/ Installation Display List Display Settings Diagnosis Cine VERSUM 50 Diagnosis RGB-Loop: Display Settings Panel: Switch OFF Temperature: ok Display Info Lamp: Rename Power: IR Address 009 FPGA: Diagnosis Cool Down: Back Fan:...

  • Page 152: Colorwheel Indexcine Versum 80

    21. Maintenance Indicators For Cine VERSUM 120 only Normal mode 0: Normal projector mode 1: Flash programming mode Command/Parameter Error 0: No error 1: Error Download Complete 0: Incomplete 1: Complete System Reset 0: System has not been reset 1: System has not been reset since last status read System Status 0: System failure 1: System OK...

  • Page 153: Test Pattern

    21. Maintenance Indicators Main Menu/ Installation Display List Display Settings CW Index Cine VERSUM 80 Installation Display Settings Input Slots Display List Switch OFF File Service Use test pattern 1 CV50 Display Info Display List 2 CV120 Rename Internal Pattern 3 CV80 IR Address 009 When no signal...
  • Page 154 21. Maintenance Indicators Test patterns generated in the Cine VERSUM Master Main Menu/ Installation Internal pattern CineVERSUM Cine VERSUM Master Installation Image settings Input Slots Internal Patterns Advanced Settings File Service Background Installation Display List Outline Service Internal Pattern Hatch 1 NO MODULE When no signal Colorbars...
  • Page 155 21. Maintenance Indicators Test patterns generated in the Cine VERSUM 120 Main Menu/ Installation Display List Display Settings Testpatterns Green Black Green Blue Cine VERSUM 120 Test Pattern Display Settings Black Switch OFF Installation White Display Info Input Slots Blue Display List Green Rename...
  • Page 156 21. Maintenance Indicators R5976468 CINE VERSUM SYSTEM 03112003...

  • Page 157: Index

    Index INDEX Address 93–94, 141 Decoding standard Changing Adjusting Cine VERSUM Master Digital link 51–53 Default address of the modules To More displays Reading out To One display Reading out/Changing Digital Link Analog controls Abstract Master Digital link cable Analog controls adjustment Long distances Display Digital Video distribution...
  • Page 158 Index Adjustment Alignment Phase (RGB-YUV) Selection Adjustment Input module Picture 81, 105 Installation Adjusting Input modules Projection Setup Picture controls Input source 99, 102 Adjusting File copy File identification Selecting input source File rename Installation Turning On/Off Safety precautions PIP Window Installation CV50 41–42 Configuration...
  • Page 159 Index Switching In/Out standby 89–91 Using the jog dial Unpacking 15–18 Using the Remote Control 90–91 Cine VERSUM 120 On address Cine VERSUM Master Cine VERSUM 50 On address pointed display Cine VERSUM 80 via Cine VERSUM Master Cine VERSUM Master Switching linked displays To and Out standby White peak...
  • Page 160 Index R5976468 CINE VERSUM SYSTEM 03112003...
  • Page 161 Revision Sheet Barco nv Home Cinema/Documentation Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.84.30, Fax: +32 56.36.88.62 E-mail: antoon.dejaegher@barco.com, Web: www.homecinema.barco.com From: Date: Please correct the following points in this documentation (R5976468/01): page wrong correct R5976468 C VERSUM S 03112003 YSTEM...

This manual is also suitable for:

R9001870 cine versum masterR9005010 cine versum masterR9010090 cine versum 120R9001870 cine versum 80R9005010 cine versum 80Cine versum 50 ... Show all

Table of Contents