Introduction What can be done in case of hard disk failure? There is a possibility to recover the hard disk of the iCon H250/H400 . This might eliminate the need to replace it in case of a hard disk failure.
Page 6
1. Hard disk recovery kit R59770070 ICON H250 / ICON H400 31/01/2007...
• iCon H250 / H400 server setup iCon server boot configuration Necessary tools • DVD-ROM: Hard Disk Recovery Data iCon H250 / iCon H400 • CD-ROM: Hard Disk Recovery Data iCon H250 / iCon H400 • USB DVD reader device •...
Warning: You only have a limited amount of time to enter this command! If you exceed this time, type shutdown —r now and restart the procedure! Note: The keyboard layout at this moment is QWERTY R59770070 ICON H250 / ICON H400 31/01/2007...
How to do the hard disk recovery? 1. Insert the DVD-ROM Hard Disk Recovery Data in the USB DVD reader 2. At the prompt, enter the following text: mount —t iso9660 /dev/sr0 /mnt/cdrom Tip: Pay attention to the spaces! R59770070 ICON H250 / ICON H400 31/01/2007...
Page 10
6. Use ↓ and the space bar to select the item Restore partition from an image file 7. Press F5 , verify the partition description and use the space bar to close the window R59770070 ICON H250 / ICON H400 31/01/2007...
Page 11
8. Press F5 and use the space bar to select OK . The disk recovery will now start. Image 2-12 Image 2-13 9. At the end of the recovery, use the space bar to select OK Image 2-14 10.Now enter the following text: shutdown —r now R59770070 ICON H250 / ICON H400 31/01/2007...
XP Product Key: enter this key. You can find it on a label on the bottom plate of the projector Image 2-16 2. Now the Windows operation system reboots: you will be asked to enter the password. Enter the text: Barco ® Tip: Check the configuration of your keyboard first (AZERTY or QUERTY) 3.
Page 13
My Layouts menu, instead of the standard My Pictures and My Music menu. 5. The operation system now logs you off: you can log in again and start using the server. The Barco selected wall paper will be visible on the desktop.
Page 14
2. Hard disk recovery procedure R59770070 ICON H250 / ICON H400 31/01/2007...